From: Alan Cox Date: Wed, 8 Aug 2007 13:28:49 +0000 (+0100) Subject: libata-core: Allow translation setting to fail X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=18b2466c3050e23c98bb69bd3f35295ff8164851;p=linux-beck.git libata-core: Allow translation setting to fail On some early drives (pre ATA1) this feature is not supported. If it fails then we know the drive geometry is the hardware geometry and the one we tried to set anyway so just carry on. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2ad4dda6d4a7..9cf46bf8c8d2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3985,6 +3985,11 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + /* A clean abort indicates an original or just out of spec drive + and we should continue as we issue the setup based on the + drive reported working geometry */ + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + err_mask = 0; DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask;