From: Lars-Peter Clausen Date: Wed, 5 Nov 2014 12:35:16 +0000 (+0100) Subject: tty: xuartps: Add support for setting modem control signals X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=19038ad9f08c96dcff870b18af8fd5ae5141dec1;p=linux-beck.git tty: xuartps: Add support for setting modem control signals Add support for setting the state of the DTR and RTS signals. Acked-by: Soren Brinkmann Signed-off-by: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 200c1af2141b..542bab37e502 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -132,6 +132,15 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); /* Goes in read_status_mask for break detection as the HW doesn't do it*/ #define CDNS_UART_IXR_BRK 0x80000000 +/* + * Modem Control register: + * The read/write Modem Control register controls the interface with the modem + * or data set, or a peripheral device emulating a modem. + */ +#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */ +#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */ +#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */ + /* * Channel Status Register: * The channel status register (CSR) is provided to enable the control logic @@ -915,7 +924,18 @@ static unsigned int cdns_uart_get_mctrl(struct uart_port *port) static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* N/A */ + u32 val; + + val = cdns_uart_readl(CDNS_UART_MODEMCR_OFFSET); + + val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR); + + if (mctrl & TIOCM_RTS) + val |= CDNS_UART_MODEMCR_RTS; + if (mctrl & TIOCM_DTR) + val |= CDNS_UART_MODEMCR_DTR; + + cdns_uart_writel(val, CDNS_UART_MODEMCR_OFFSET); } #ifdef CONFIG_CONSOLE_POLL