From: Felipe Balbi Date: Wed, 3 Aug 2016 11:16:15 +0000 (+0300) Subject: usb: dwc3: make sure UX_EXIT_PX is cleared X-Git-Tag: v4.12-rc1~97^2~25^2~50 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1966b8657d058ecb95031809b607bf3fd1e01c10;p=karo-tx-linux.git usb: dwc3: make sure UX_EXIT_PX is cleared This bit is only supposed to be used with known buggy PHYs, however some platforms might erroneously set it. In order to avoid it, let's make sure this bit is always cleared. If some PHY needs this, we will need to add a quirk flag. Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 369bab16a824..8173d0634d68 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -431,6 +431,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + /* + * Make sure UX_EXIT_PX is cleared as that causes issues with some + * PHYs. Also, this bit is not supposed to be used in normal operation. + */ + reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; + /* * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY * to '0' during coreConsultant configuration. So default value diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2b9e4ca3c932..fd640f11c0fe 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -232,6 +232,7 @@ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) #define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) +#define DWC3_GUSB3PIPECTL_UX_EXIT_PX (1 << 27) #define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)