From: Vince Bridgers Date: Tue, 29 Jul 2014 20:19:58 +0000 (-0500) Subject: net: libphy: Add stubs to hook IEEE MMD Register reads and writes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=19936942a1a30ce387ea3782b508ac72957b2293;p=linux-beck.git net: libphy: Add stubs to hook IEEE MMD Register reads and writes The Micrel ksz9021 PHY does not support standard IEEE standard MMD extended register access, therefore requires stubs to fail the read register method and do nothing for the write register method when libphy attempts to read and/or configure Energy Efficient Ethernet features in PHYS that do support those features. This problem was observed on an Altera Cyclone V SOC development kit that uses the Synopsys EMAC and the Micrel ksz9021 PHY. This patch was tested on the same board, and Energy Efficient Ethernet is now disabled as expected since the Micrel PHY does not support that feature. Signed-off-by: Vince Bridgers Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index bc7c7d2f75f2..fd0ea7c50ee6 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -420,6 +420,26 @@ static int ksz8873mll_config_aneg(struct phy_device *phydev) return 0; } +/* This routine returns -1 as an indication to the caller that the + * Micrel ksz9021 10/100/1000 PHY does not support standard IEEE + * MMD extended PHY registers. + */ +static int +ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, + int regnum) +{ + return -1; +} + +/* This routine does nothing since the Micrel ksz9021 does not support + * standard IEEE MMD extended PHY registers. + */ +static void +ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, + int regnum, u32 val) +{ +} + static struct phy_driver ksphy_driver[] = { { .phy_id = PHY_ID_KS8737, @@ -565,6 +585,8 @@ static struct phy_driver ksphy_driver[] = { .config_intr = ksz9021_config_intr, .suspend = genphy_suspend, .resume = genphy_resume, + .read_mmd_indirect = ksz9021_rd_mmd_phyreg, + .write_mmd_indirect = ksz9021_wr_mmd_phyreg, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ9031,