From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 18 Mar 2014 18:04:48 +0000 (+0100)
Subject: ARM: shmobile: koelsch: Set ethernet PHY LED mode
X-Git-Tag: next-20140428~78^2~8^6~16
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=19f647cbd432eff181777bbe0f302c62af4a180d;p=karo-tx-linux.git

ARM: shmobile: koelsch: Set ethernet PHY LED mode

The Koelsch board uses the ethernet PHY LED0 as a link signal connected
to the ethernet controller. Specify the corresponding LED mode for the
PHY.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fd1d6ee48a28..ee23b7b99ec9 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -297,6 +297,7 @@
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
 	};
 };