From: H Hartley Sweeten Date: Wed, 14 Oct 2015 00:47:41 +0000 (-0700) Subject: staging: comedi: cb_pcidas: tidy up trigger control/status register X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1a55808d6245a294d1785778de7d80cab3d14136;p=linux-beck.git staging: comedi: cb_pcidas: tidy up trigger control/status register Rename this register and its bit defines so they have namespace associated with the driver. Use the BIT macro to define the bits. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 72395ea2876c..423a2e1fc307 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -112,16 +112,18 @@ #define PCIDAS_AI_PACER_MASK PCIDAS_AI_PACER(3) /* pacer source bits */ #define PCIDAS_AI_EOC BIT(14) /* adc not busy */ -#define TRIG_CONTSTAT 4 /* TRIGGER CONTROL/STATUS register */ -#define SW_TRIGGER 0x1 /* software start trigger */ -#define EXT_TRIGGER 0x2 /* ext. start trigger */ -#define ANALOG_TRIGGER 0x3 /* ext. analog trigger */ -#define TRIGGER_MASK 0x3 /* start trigger mask */ -#define TGPOL 0x04 /* invert trigger (1602 only) */ -#define TGSEL 0x08 /* edge/level trigerred (1602 only) */ -#define TGEN 0x10 /* enable external start trigger */ -#define BURSTE 0x20 /* burst mode enable */ -#define XTRCL 0x80 /* clear external trigger */ +#define PCIDAS_TRIG_REG 0x04 /* TRIGGER CONTROL/STATUS register */ +#define PCIDAS_TRIG_SEL(x) (((x) & 0x3) << 0) +#define PCIDAS_TRIG_SEL_NONE PCIDAS_TRIG_SEL(0) /* no start trigger */ +#define PCIDAS_TRIG_SEL_SW PCIDAS_TRIG_SEL(1) /* software start trigger */ +#define PCIDAS_TRIG_SEL_EXT PCIDAS_TRIG_SEL(2) /* ext. start trigger */ +#define PCIDAS_TRIG_SEL_ANALOG PCIDAS_TRIG_SEL(3) /* ext. analog trigger */ +#define PCIDAS_TRIG_SEL_MASK PCIDAS_TRIG_SEL(3) /* start trigger mask */ +#define PCIDAS_TRIG_POL BIT(2) /* invert trigger (1602 only) */ +#define PCIDAS_TRIG_MODE BIT(3) /* edge/level trigerred (1602 only) */ +#define PCIDAS_TRIG_EN BIT(4) /* enable external start trigger */ +#define PCIDAS_TRIG_BURSTE BIT(5) /* burst mode enable */ +#define PCIDAS_TRIG_CLR BIT(7) /* clear external trigger */ #define CALIBRATION_REG 6 /* CALIBRATION register */ #define SELECT_8800_BIT 0x100 /* select 8800 caldac */ @@ -859,7 +861,7 @@ static int cb_pcidas_ai_cmd(struct comedi_device *dev, /* make sure CAL_EN_BIT is disabled */ outw(0, devpriv->pcibar1 + CALIBRATION_REG); /* initialize before settings pacer source and count values */ - outw(0, devpriv->pcibar1 + TRIG_CONTSTAT); + outw(PCIDAS_TRIG_SEL_NONE, devpriv->pcibar1 + PCIDAS_TRIG_REG); /* clear fifo */ outw(0, devpriv->pcibar2 + PCIDAS_AI_FIFO_CLR_REG); @@ -913,19 +915,19 @@ static int cb_pcidas_ai_cmd(struct comedi_device *dev, /* set start trigger and burst mode */ bits = 0; if (cmd->start_src == TRIG_NOW) { - bits |= SW_TRIGGER; + bits |= PCIDAS_TRIG_SEL_SW; } else { /* TRIG_EXT */ - bits |= EXT_TRIGGER | TGEN | XTRCL; + bits |= PCIDAS_TRIG_SEL_EXT | PCIDAS_TRIG_EN | PCIDAS_TRIG_CLR; if (board->is_1602) { if (cmd->start_arg & CR_INVERT) - bits |= TGPOL; + bits |= PCIDAS_TRIG_POL; if (cmd->start_arg & CR_EDGE) - bits |= TGSEL; + bits |= PCIDAS_TRIG_MODE; } } if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1) - bits |= BURSTE; - outw(bits, devpriv->pcibar1 + TRIG_CONTSTAT); + bits |= PCIDAS_TRIG_BURSTE; + outw(bits, devpriv->pcibar1 + PCIDAS_TRIG_REG); return 0; } @@ -1036,7 +1038,7 @@ static int cb_pcidas_cancel(struct comedi_device *dev, spin_unlock_irqrestore(&dev->spinlock, flags); /* disable start trigger source and burst mode */ - outw(0, devpriv->pcibar1 + TRIG_CONTSTAT); + outw(PCIDAS_TRIG_SEL_NONE, devpriv->pcibar1 + PCIDAS_TRIG_REG); outw(PCIDAS_AI_PACER_SW, devpriv->pcibar1 + PCIDAS_AI_REG); return 0;