From: Ulf Hansson Date: Mon, 31 Mar 2014 12:19:21 +0000 (+0200) Subject: mmc: mmci: Add DT bindings for feedback clock pin X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1a7e99c1fe080cc75ab34e1cbf788ed09b2f58b5;p=linux-beck.git mmc: mmci: Add DT bindings for feedback clock pin The ST Micro variant supports the option of using a feedback clock signal in favor of the clockout pin when latching incoming signals on the data bus. Since this is matter of how pins are being routed we need to provide a new DT binding to be able to configure this through DT. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 9bd2ffa704a7..2c8756fb7755 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -24,6 +24,7 @@ Optional properties: - st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1]. - st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7]. - st,sig-dir-cmd : cmd signal direction pin used for CMD. +- st,sig-pin-fbclk : feedback clock signal pin used. Example: @@ -47,6 +48,7 @@ sdi0_per1@80126000 { st,sig-dir-dat0; st,sig-dir-dat2; st,sig-dir-cmd; + st,sig-pin-fbclk; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index aa26e810b7ad..2ce9111c4627 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1402,6 +1402,8 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, pdata->sigdir |= MCI_ST_DATA74DIREN; if (of_get_property(np, "st,sig-dir-cmd", NULL)) pdata->sigdir |= MCI_ST_CMDDIREN; + if (of_get_property(np, "st,sig-pin-fbclk", NULL)) + pdata->sigdir |= MCI_ST_FBCLKEN; pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);