From: Sergei Shtylyov Date: Sat, 8 Jun 2013 20:38:41 +0000 (+0400) Subject: ARM: shmobile: BOCK-W: add USB support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1a87b01d3b18709ae240ec90ae612354dd44d9a9;p=linux-beck.git ARM: shmobile: BOCK-W: add USB support Register the USB PHY device from bockw_init(), passing the platform data to it. Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to get registered too... Don't forget to add USB PENC0/1 pins to bockw_pinctrl_map[]. The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index dac4365c5158..7ed2401b899c 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -38,12 +38,18 @@ static struct resource smsc911x_resources[] = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata; + static const struct pinctrl_map bockw_pinctrl_map[] = { /* SCIF0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_data_a", "scif0"), PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_ctrl", "scif0"), + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + "usb0", "usb0"), + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + "usb1", "usb1"), }; #define IRQ0MR 0x30 @@ -54,6 +60,7 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + r8a7778_add_usb_phy_device(&usb_phy_platform_data); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); @@ -91,4 +98,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_machine = bockw_init, .init_time = shmobile_timer_init, .dt_compat = bockw_boards_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END