From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:23 +0000 (+0000) Subject: bnx2x: Support probing and removing of VF device X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1ab4434;p=linux-beck.git bnx2x: Support probing and removing of VF device To support probing and removing of a bnx2x virtual function the following were added: 1. add bnx2x_vfpf.h: defines the VF to PF channel 2. add bnx2x_sriov.h: header for bnx2x SR-IOV functionality 3. enumerate VF hw types (identify VFs) 4. if driving a VF, map VF bar 5. if driving a VF, allocate Vf to PF channel 6. refactor interrupt flows to include VF Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index e8d4db10c8f3..ff5da33df576 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -49,6 +49,12 @@ #include "bnx2x_dcb.h" #include "bnx2x_stats.h" +enum bnx2x_int_mode { + BNX2X_INT_MODE_MSIX, + BNX2X_INT_MODE_INTX, + BNX2X_INT_MODE_MSI +}; + /* error/debug prints */ #define DRV_MODULE_NAME "bnx2x" @@ -954,6 +960,9 @@ struct bnx2x_port { extern struct workqueue_struct *bnx2x_wq; #define BNX2X_MAX_NUM_OF_VFS 64 +#define BNX2X_VF_CID_WND 0 +#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) +#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) #define BNX2X_VF_ID_INVALID 0xFF /* @@ -1231,6 +1240,10 @@ struct bnx2x { (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) #define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) + /* vf pf channel mailbox contains request and response buffers */ + struct bnx2x_vf_mbx_msg *vf2pf_mbox; + dma_addr_t vf2pf_mbox_mapping; + struct net_device *dev; struct pci_dev *pdev; @@ -1318,8 +1331,6 @@ struct bnx2x { #define DISABLE_MSI_FLAG (1 << 7) #define TPA_ENABLE_FLAG (1 << 8) #define NO_MCP_FLAG (1 << 9) - -#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG) #define GRO_ENABLE_FLAG (1 << 10) #define MF_FUNC_DIS (1 << 11) #define OWN_CNIC_IRQ (1 << 12) @@ -1330,6 +1341,11 @@ struct bnx2x { #define BC_SUPPORTS_FCOE_FEATURES (1 << 19) #define USING_SINGLE_MSIX_FLAG (1 << 20) #define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) +#define IS_VF_FLAG (1 << 22) + +#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) +#define IS_VF(bp) ((bp)->flags & IS_VF_FLAG) +#define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG)) #define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) #define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) @@ -1432,6 +1448,7 @@ struct bnx2x { u8 igu_sb_cnt; u8 min_msix_vec_cnt; + u32 igu_base_addr; dma_addr_t def_status_blk_mapping; struct bnx2x_slowpath *slowpath; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 01588b66a38c..8687eb3357fd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1439,12 +1439,15 @@ void bnx2x_free_irq(struct bnx2x *bp) int bnx2x_enable_msix(struct bnx2x *bp) { - int msix_vec = 0, i, rc, req_cnt; + int msix_vec = 0, i, rc; - bp->msix_table[msix_vec].entry = msix_vec; - BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n", - bp->msix_table[0].entry); - msix_vec++; + /* VFs don't have a default status block */ + if (IS_PF(bp)) { + bp->msix_table[msix_vec].entry = msix_vec; + BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n", + bp->msix_table[0].entry); + msix_vec++; + } /* Cnic requires an msix vector for itself */ if (CNIC_SUPPORT(bp)) { @@ -1462,9 +1465,10 @@ int bnx2x_enable_msix(struct bnx2x *bp) msix_vec++; } - req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp) + 1; + DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n", + msix_vec); - rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt); + rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec); /* * reconfigure number of tx/rx queues according to available @@ -1472,7 +1476,7 @@ int bnx2x_enable_msix(struct bnx2x *bp) */ if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) { /* how less vectors we will have? */ - int diff = req_cnt - rc; + int diff = msix_vec - rc; BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc); @@ -3905,7 +3909,10 @@ int bnx2x_alloc_mem_bp(struct bnx2x *bp) * The biggest MSI-X table we might need is as a maximum number of fast * path IGU SBs plus default SB (for PF). */ - msix_table_size = bp->igu_sb_cnt + 1; + msix_table_size = bp->igu_sb_cnt; + if (IS_PF(bp)) + msix_table_size++; + BNX2X_DEV_INFO("msix_table_size %d\n", msix_table_size); /* fp array: RSS plus CNIC related L2 queues */ fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 0991534f61da..bca371e45e95 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -863,7 +863,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) netif_napi_del(&bnx2x_fp(bp, i, napi)); } -void bnx2x_set_int_mode(struct bnx2x *bp); +int bnx2x_set_int_mode(struct bnx2x *bp); static inline void bnx2x_disable_msi(struct bnx2x *bp) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 940ef859dc60..bb59004ff5b9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -59,6 +59,8 @@ #include "bnx2x_init.h" #include "bnx2x_init_ops.h" #include "bnx2x_cmn.h" +#include "bnx2x_vfpf.h" +#include "bnx2x_sriov.h" #include "bnx2x_dcb.h" #include "bnx2x_sp.h" @@ -133,39 +135,49 @@ enum bnx2x_board_type { BCM57711E, BCM57712, BCM57712_MF, + BCM57712_VF, BCM57800, BCM57800_MF, + BCM57800_VF, BCM57810, BCM57810_MF, - BCM57840_O, + BCM57810_VF, BCM57840_4_10, BCM57840_2_20, - BCM57840_MFO, BCM57840_MF, + BCM57840_VF, BCM57811, - BCM57811_MF + BCM57811_MF, + BCM57840_O, + BCM57840_MFO, + BCM57811_VF }; /* indexed by board_type, above */ static struct { char *name; } board_info[] = { - { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, - { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, - { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, - { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"}, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"}, - { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet"}, - { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function"}, + [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, + [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, + [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, + [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, + [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, + [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" }, + [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, + [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, + [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" }, + [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, + [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, + [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" }, + [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, + [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, + [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }, + [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" }, + [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" }, + [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, + [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" } }; #ifndef PCI_DEVICE_ID_NX2_57710 @@ -7792,41 +7804,49 @@ int bnx2x_setup_leading(struct bnx2x *bp) * * In case of MSI-X it will also try to enable MSI-X. */ -void bnx2x_set_int_mode(struct bnx2x *bp) +int bnx2x_set_int_mode(struct bnx2x *bp) { + int rc = 0; + + if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) + return -EINVAL; + switch (int_mode) { - case INT_MODE_MSI: + case BNX2X_INT_MODE_MSIX: + /* attempt to enable msix */ + rc = bnx2x_enable_msix(bp); + + /* msix attained */ + if (!rc) + return 0; + + /* vfs use only msix */ + if (rc && IS_VF(bp)) + return rc; + + /* failed to enable multiple MSI-X */ + BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", + bp->num_queues, + 1 + bp->num_cnic_queues); + + /* falling through... */ + case BNX2X_INT_MODE_MSI: bnx2x_enable_msi(bp); + /* falling through... */ - case INT_MODE_INTx: + case BNX2X_INT_MODE_INTX: bp->num_ethernet_queues = 1; bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; BNX2X_DEV_INFO("set number of queues to 1\n"); break; default: - /* if we can't use MSI-X we only need one fp, - * so try to enable MSI-X with the requested number of fp's - * and fallback to MSI or legacy INTx with one fp - */ - if (bnx2x_enable_msix(bp) || - bp->flags & USING_SINGLE_MSIX_FLAG) { - /* failed to enable multiple MSI-X */ - BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", - bp->num_queues, - 1 + bp->num_cnic_queues); - - bp->num_queues = 1 + bp->num_cnic_queues; - - /* Try to enable MSI */ - if (!(bp->flags & USING_SINGLE_MSIX_FLAG) && - !(bp->flags & DISABLE_MSI_FLAG)) - bnx2x_enable_msi(bp); - } - break; + BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); + return -EINVAL; } + return 0; } -/* must be called prioir to any HW initializations */ +/* must be called prior to any HW initializations */ static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) { return L2_ILT_LINES(bp); @@ -11081,9 +11101,13 @@ static int bnx2x_init_bp(struct bnx2x *bp) INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); - rc = bnx2x_get_hwinfo(bp); - if (rc) - return rc; + if (IS_PF(bp)) { + rc = bnx2x_get_hwinfo(bp); + if (rc) + return rc; + } else { + random_ether_addr(bp->dev->dev_addr); + } bnx2x_set_modes_bitmap(bp); @@ -11096,7 +11120,7 @@ static int bnx2x_init_bp(struct bnx2x *bp) func = BP_FUNC(bp); /* need to reset chip if undi was active */ - if (!BP_NOMCP(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* init fw_seq */ bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & @@ -11133,6 +11157,8 @@ static int bnx2x_init_bp(struct bnx2x *bp) bp->mrrs = mrrs; bp->tx_ring_size = IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL; + if (IS_VF(bp)) + bp->rx_ring_size = MAX_RX_AVAIL; /* make sure that the numbers are in the right granularity */ bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; @@ -11161,12 +11187,18 @@ static int bnx2x_init_bp(struct bnx2x *bp) bp->cnic_base_cl_id = FP_SB_MAX_E2; /* multiple tx priority */ - if (CHIP_IS_E1x(bp)) + if (IS_VF(bp)) + bp->max_cos = 1; + else if (CHIP_IS_E1x(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E1X; - if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) + else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; - if (CHIP_IS_E3B0(bp)) + else if (CHIP_IS_E3B0(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; + else + BNX2X_ERR("unknown chip %x revision %x\n", + CHIP_NUM(bp), CHIP_REV(bp)); + BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); /* We need at least one default status block for slow-path events, * second status block for the L2 queue, and a third status block for @@ -11551,10 +11583,9 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) return 0; } -static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, - unsigned long board_type) +static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, + struct net_device *dev, unsigned long board_type) { - struct bnx2x *bp; int rc; u32 pci_cfg_dword; bool chip_is_e1x = (board_type == BCM57710 || @@ -11562,11 +11593,9 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, board_type == BCM57711E); SET_NETDEV_DEV(dev, &pdev->dev); - bp = netdev_priv(dev); bp->dev = dev; bp->pdev = pdev; - bp->flags = 0; rc = pci_enable_device(pdev); if (rc) { @@ -11582,9 +11611,8 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, goto err_out_disable; } - if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { - dev_err(&bp->pdev->dev, "Cannot find second PCI device" - " base address, aborting\n"); + if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); rc = -ENODEV; goto err_out_disable; } @@ -11609,12 +11637,14 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, pci_save_state(pdev); } - bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (bp->pm_cap == 0) { - dev_err(&bp->pdev->dev, - "Cannot find power management capability, aborting\n"); - rc = -EIO; - goto err_out_release; + if (IS_PF(bp)) { + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + dev_err(&bp->pdev->dev, + "Cannot find power management capability, aborting\n"); + rc = -EIO; + goto err_out_release; + } } if (!pci_is_pcie(pdev)) { @@ -11665,25 +11695,28 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, * Clean the following indirect addresses for all functions since it * is not used by the driver. */ - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + if (IS_PF(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + + if (chip_is_e1x) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } - if (chip_is_e1x) { - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + /* Enable internal target-read (in case we are probed after PF + * FLR). Must be done prior to any BAR read access. Only for + * 57712 and up + */ + if (!chip_is_e1x) + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); } - /* - * Enable internal target-read (in case we are probed after PF FLR). - * Must be done prior to any BAR read access. Only for 57712 and up - */ - if (!chip_is_e1x) - REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); - dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &bnx2x_netdev_ops; @@ -11734,8 +11767,9 @@ err_out: static void bnx2x_get_pcie_width_speed(struct bnx2x *bp, int *width, int *speed) { - u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + u32 val = 0; + pci_read_config_dword(bp->pdev, PCICFG_LINK_CONTROL, &val); *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; /* return value of 1=2.5GHz 2=5GHz */ @@ -12012,10 +12046,10 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp) * */ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, - int cnic_cnt) + int cnic_cnt, bool is_vf) { - int pos; - u16 control; + int pos, index; + u16 control = 0; pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); @@ -12023,85 +12057,114 @@ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, * If MSI-X is not supported - return number of SBs needed to support * one fast path queue: one FP queue + SB for CNIC */ - if (!pos) + if (!pos) { + dev_info(&pdev->dev, "no msix capability found\n"); return 1 + cnic_cnt; + } + dev_info(&pdev->dev, "msix capability found\n"); /* * The value in the PCI configuration space is the index of the last * entry, namely one less than the actual size of the table, which is * exactly what we want to return from this function: number of all SBs * without the default SB. + * For VFs there is no default SB, then we return (index+1). */ pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control); - return control & PCI_MSIX_FLAGS_QSIZE; -} -struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *); + index = control & PCI_MSIX_FLAGS_QSIZE; -static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *dev = NULL; - struct bnx2x *bp; - int pcie_width, pcie_speed; - int rc, max_non_def_sbs; - int rx_count, tx_count, rss_count, doorbell_size; - int cnic_cnt; - /* - * An estimated maximum supported CoS number according to the chip - * version. - * We will try to roughly estimate the maximum number of CoSes this chip - * may support in order to minimize the memory allocated for Tx - * netdev_queue's. This number will be accurately calculated during the - * initialization of bp->max_cos based on the chip versions AND chip - * revision in the bnx2x_init_bp(). - */ - u8 max_cos_est = 0; + return is_vf ? index + 1 : index; +} - switch (ent->driver_data) { +static int set_max_cos_est(int chip_id) +{ + switch (chip_id) { case BCM57710: case BCM57711: case BCM57711E: - max_cos_est = BNX2X_MULTI_TX_COS_E1X; - break; - + return BNX2X_MULTI_TX_COS_E1X; case BCM57712: case BCM57712_MF: - max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0; - break; - + case BCM57712_VF: + return BNX2X_MULTI_TX_COS_E2_E3A0; case BCM57800: case BCM57800_MF: + case BCM57800_VF: case BCM57810: case BCM57810_MF: - case BCM57840_O: case BCM57840_4_10: case BCM57840_2_20: + case BCM57840_O: case BCM57840_MFO: + case BCM57810_VF: case BCM57840_MF: + case BCM57840_VF: case BCM57811: case BCM57811_MF: - max_cos_est = BNX2X_MULTI_TX_COS_E3B0; - break; - + case BCM57811_VF: + return BNX2X_MULTI_TX_COS_E3B0; + return 1; default: - pr_err("Unknown board_type (%ld), aborting\n", - ent->driver_data); + pr_err("Unknown board_type (%d), aborting\n", chip_id); return -ENODEV; } +} - cnic_cnt = 1; - max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); +static int set_is_vf(int chip_id) +{ + switch (chip_id) { + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return true; + default: + return false; + } +} - WARN_ON(!max_non_def_sbs); +struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); + +static int bnx2x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct bnx2x *bp; + int pcie_width, pcie_speed; + int rc, max_non_def_sbs; + int rx_count, tx_count, rss_count, doorbell_size; + int max_cos_est; + bool is_vf; + int cnic_cnt; + + /* An estimated maximum supported CoS number according to the chip + * version. + * We will try to roughly estimate the maximum number of CoSes this chip + * may support in order to minimize the memory allocated for Tx + * netdev_queue's. This number will be accurately calculated during the + * initialization of bp->max_cos based on the chip versions AND chip + * revision in the bnx2x_init_bp(). + */ + max_cos_est = set_max_cos_est(ent->driver_data); + if (max_cos_est < 0) + return max_cos_est; + is_vf = set_is_vf(ent->driver_data); + cnic_cnt = is_vf ? 0 : 1; + + max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt, is_vf); /* Maximum number of RSS queues: one IGU SB goes to CNIC */ - rss_count = max_non_def_sbs - cnic_cnt; + rss_count = is_vf ? 1 : max_non_def_sbs - cnic_cnt; + + if (rss_count < 1) + return -EINVAL; /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ rx_count = rss_count + cnic_cnt; - /* - * Maximum number of netdev Tx queues: + /* Maximum number of netdev Tx queues: * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 */ tx_count = rss_count * max_cos_est + cnic_cnt; @@ -12113,22 +12176,28 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) bp = netdev_priv(dev); + bp->flags = 0; + if (is_vf) + bp->flags |= IS_VF_FLAG; + bp->igu_sb_cnt = max_non_def_sbs; + bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; bp->msg_enable = debug; bp->cnic_support = cnic_cnt; bp->cnic_probe = bnx2x_cnic_probe; pci_set_drvdata(pdev, dev); - rc = bnx2x_init_dev(pdev, dev, ent->driver_data); + rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); if (rc < 0) { free_netdev(dev); return rc; } + BNX2X_DEV_INFO("This is a %s function\n", + IS_PF(bp) ? "physical" : "virtual"); BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); - BNX2X_DEV_INFO("max_non_def_sbs %d\n", max_non_def_sbs); - + BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", tx_count, rx_count); @@ -12136,19 +12205,28 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto init_one_exit; - /* - * Map doorbels here as we need the real value of bp->max_cos which - * is initialized in bnx2x_init_bp(). + /* Map doorbells here as we need the real value of bp->max_cos which + * is initialized in bnx2x_init_bp() to determine the number of + * l2 connections. */ - doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); - if (doorbell_size > pci_resource_len(pdev, 2)) { - dev_err(&bp->pdev->dev, - "Cannot map doorbells, bar size too small, aborting\n"); - rc = -ENOMEM; - goto init_one_exit; + if (IS_VF(bp)) { + /* vf doorbells are embedded within the regview */ + bp->doorbells = bp->regview + PXP_VF_ADDR_DB_START; + + /* allocate vf2pf mailbox for vf to pf channel */ + BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + } else { + doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); + if (doorbell_size > pci_resource_len(pdev, 2)) { + dev_err(&bp->pdev->dev, + "Cannot map doorbells, bar size too small, aborting\n"); + rc = -ENOMEM; + goto init_one_exit; + } + bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), + doorbell_size); } - bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), - doorbell_size); if (!bp->doorbells) { dev_err(&bp->pdev->dev, "Cannot map doorbell space, aborting\n"); @@ -12158,6 +12236,7 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* calc qm_cid_count */ bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); + BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); /* disable FCOE L2 queue for E1x*/ if (CHIP_IS_E1x(bp)) @@ -12179,13 +12258,19 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Configure interrupt mode: try to enable MSI-X/MSI if * needed. */ - bnx2x_set_int_mode(bp); + rc = bnx2x_set_int_mode(bp); + if (rc) { + dev_err(&pdev->dev, "Cannot set interrupts\n"); + goto init_one_exit; + } + /* register the net device */ rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } + BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); if (!NO_FCOE(bp)) { @@ -12196,6 +12281,8 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed); + BNX2X_DEV_INFO("got pcie width %d and speed %d\n", + pcie_width, pcie_speed); BNX2X_DEV_INFO( "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", @@ -12209,11 +12296,16 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; +alloc_mem_err: + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + rc = -ENOMEM; + init_one_exit: if (bp->regview) iounmap(bp->regview); - if (bp->doorbells) + if (IS_PF(bp) && bp->doorbells) iounmap(bp->doorbells); free_netdev(dev); @@ -12253,13 +12345,15 @@ static void bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); /* Power on: we can't let PCI layer write to us while we are in D3 */ - bnx2x_set_power_state(bp, PCI_D0); + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D0); /* Disable MSI/MSI-X */ bnx2x_disable_msi(bp); /* Power off */ - bnx2x_set_power_state(bp, PCI_D3hot); + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); /* Make sure RESET task is not scheduled before continuing */ cancel_delayed_work_sync(&bp->sp_rtnl_task); @@ -12267,11 +12361,15 @@ static void bnx2x_remove_one(struct pci_dev *pdev) if (bp->regview) iounmap(bp->regview); - if (bp->doorbells) - iounmap(bp->doorbells); - - bnx2x_release_firmware(bp); + /* for vf doorbells are part of the regview and were unmapped along with + * it. FW is only loaded by PF. + */ + if (IS_PF(bp)) { + if (bp->doorbells) + iounmap(bp->doorbells); + bnx2x_release_firmware(bp); + } bnx2x_free_mem_bp(bp); free_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index bc2f65b32649..463a9843eeb1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6554,6 +6554,15 @@ (7L< + * Written by: Shmulik Ravid + * Ariel Elior + */ +#ifndef BNX2X_SRIOV_H +#define BNX2X_SRIOV_H + +struct bnx2x_vf_mbx_msg { + union vfpf_tlvs req; + union pfvf_tlvs resp; +}; + +#endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h new file mode 100644 index 000000000000..bb3767595b3a --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -0,0 +1,37 @@ +/* bnx2x_vfpf.h: Broadcom Everest network driver. + * + * Copyright (c) 2011-2012 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein + * Written by: Ariel Elior + */ +#ifndef VF_PF_IF_H +#define VF_PF_IF_H + +/* HW VF-PF channel definitions + * A.K.A VF-PF mailbox + */ +#define TLV_BUFFER_SIZE 1024 + +struct tlv_buffer_size { + u8 tlv_buffer[TLV_BUFFER_SIZE]; +}; + +union vfpf_tlvs { + struct tlv_buffer_size tlv_buf_size; +}; + +union pfvf_tlvs { + struct tlv_buffer_size tlv_buf_size; +}; +#endif /* VF_PF_IF_H */