From: Christopher Spinrath Date: Tue, 7 Jun 2016 17:14:17 +0000 (+0200) Subject: ARM: dts: imx6q: add support for the Utilite Pro X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1ad257d1c8065385554808d2f419a0d6e67559ec;p=linux-beck.git ARM: dts: imx6q: add support for the Utilite Pro The CompuLab Utilite Pro is a miniature fanless desktop pc based on the i.MX6 Quad powered cm-fx6 module. It features two serial ports, USB OTG, 4x USB, analog audio and S/PDIF, 2x Gb Ethernet, HDMI and DVI ports, an on-board 32GB SSD, a mmc slot, and on-board wifi/bt. Add initial support for it including USB, Ethernet (both ports), sata and HDMI support. Signed-off-by: Christopher Spinrath Acked-by: Igor Grinberg Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 514b98054dda..146850b72487 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -378,6 +378,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ + imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6qp-nitrogen6_max.dtb \ diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts new file mode 100644 index 000000000000..721974537aa0 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -0,0 +1,153 @@ +/* + * Copyright 2013 CompuLab Ltd. + * Copyright 2016 Christopher Spinrath + * + * Based on the devicetree distributed with the vendor kernel for the + * Utilite Pro: + * Copyright 2013 CompuLab Ltd. + * Author: Valentin Raevsky + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include "imx6q-cm-fx6.dts" + +/ { + model = "CompuLab Utilite Pro"; + compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; + + aliases { + ethernet1 = ð1; + rtc0 = &em3027; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; +}; + +&pcie { + pcie@0,0 { + reg = <0x000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + /* non-removable i211 ethernet card */ + eth1: intel,i211@pcie0,0 { + reg = <0x010000 0 0 0 0>; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +};