From: Marcin Niestroj Date: Mon, 12 Dec 2016 16:58:42 +0000 (+0100) Subject: iio: st_pressure: Fix data sign X-Git-Tag: v4.11-rc1~116^2~332^2~35 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1b211d48abaa0e12e6e6177c0316ff55d11fdfce;p=karo-tx-linux.git iio: st_pressure: Fix data sign Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement. I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan. Fixes: 217494e5b780 ("iio:pressure: Add STMicroelectronics pressures driver") Fixes: 2f5effcbd097 ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor") Fixes: 7885a8ce6800 ("iio: pressure: st: Add support for new LPS001WP pressure sensor") Fixes: e039e2f5b4da ("iio:st_pressure:initial lps22hb sensor support") Signed-off-by: Marcin Niestroj Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index e19e0787864c..2e3c406f308d 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -136,7 +136,7 @@ static const struct iio_chan_spec st_press_1_channels[] = { .address = ST_PRESS_1_OUT_XL_ADDR, .scan_index = 0, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 24, .storagebits = 32, .endianness = IIO_LE, @@ -149,7 +149,7 @@ static const struct iio_chan_spec st_press_1_channels[] = { .address = ST_TEMP_1_OUT_L_ADDR, .scan_index = 1, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_LE, @@ -168,7 +168,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { .address = ST_PRESS_LPS001WP_OUT_L_ADDR, .scan_index = 0, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_LE, @@ -182,7 +182,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { .address = ST_TEMP_LPS001WP_OUT_L_ADDR, .scan_index = 1, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_LE, @@ -200,7 +200,7 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = { .address = ST_PRESS_1_OUT_XL_ADDR, .scan_index = 0, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 24, .storagebits = 32, .endianness = IIO_LE,