From: Boris Brezillon Date: Thu, 14 Apr 2016 19:17:26 +0000 (+0200) Subject: leds: pwm: Use pwm_get_args() where appropriate X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1b50673dfa6486a69895bd45bb5eeaaede0a2b93;p=linux-beck.git leds: pwm: Use pwm_get_args() where appropriate The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon Acked-by: Jacek Anaszewski Signed-off-by: Thierry Reding --- diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 4783bacb2e9d..a9145aa7f36a 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -91,6 +91,7 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv, struct led_pwm *led, struct device_node *child) { struct led_pwm_data *led_data = &priv->leds[priv->num_leds]; + struct pwm_args pargs; int ret; led_data->active_low = led->active_low; @@ -117,7 +118,15 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv, else led_data->cdev.brightness_set_blocking = led_pwm_set_blocking; - led_data->period = pwm_get_period(led_data->pwm); + /* + * FIXME: pwm_apply_args() should be removed when switching to the + * atomic PWM API. + */ + pwm_apply_args(led_data->pwm); + + pwm_get_args(led_data->pwm, &pargs); + + led_data->period = pargs.period; if (!led_data->period && (led->pwm_period_ns > 0)) led_data->period = led->pwm_period_ns;