From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 13 Sep 2011 01:37:21 +0000 (+1000)
Subject: Merge remote-tracking branch 'arm-lpae/for-next'
X-Git-Tag: next-20110913~102
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1b801121d6dd20639a11bc022100c065c38e75ba;p=karo-tx-linux.git

Merge remote-tracking branch 'arm-lpae/for-next'

Conflicts:
	arch/arm/include/asm/page.h
	arch/arm/include/asm/pgalloc.h
	arch/arm/include/asm/pgtable-hwdef.h
	arch/arm/include/asm/pgtable.h
	arch/arm/include/asm/tlb.h
	arch/arm/kernel/head.S
	arch/arm/kernel/sleep.S
	arch/arm/mm/dma-mapping.c
	arch/arm/mm/mmu.c
---

1b801121d6dd20639a11bc022100c065c38e75ba
diff --cc arch/arm/include/asm/proc-fns.h
index 9e92cb205e65,34e852c636e0..f3628fb3d2b3
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@@ -79,12 -83,12 +83,16 @@@ extern void cpu_proc_fin(void)
  extern int cpu_do_idle(void);
  extern void cpu_dcache_clean_area(void *, int);
  extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+ #ifdef CONFIG_ARM_LPAE
+ extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+ #else
  extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+ #endif
  extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 +
 +/* These three are private to arch/arm/kernel/suspend.c */
 +extern void cpu_do_suspend(void *);
 +extern void cpu_do_resume(void *);
  #else
  #define cpu_proc_init			processor._proc_init
  #define cpu_proc_fin			processor._proc_fin
diff --cc arch/arm/kernel/sleep.S
index 020e99c845e7,ecece65251fa..4ac45fe955fe
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@@ -52,17 -67,35 +52,19 @@@ ENDPROC(cpu_suspend_abort
  
  /*
   * r0 = control register value
 - * r1 = v:p offset (preserved by cpu_do_resume)
 - * r2 = phys page table base
 - * r3 = L1 section flags
   */
 +	.align	5
  ENTRY(cpu_resume_mmu)
 -	adr	r4, cpu_resume_turn_mmu_on
 -	mov	r4, r4, lsr #20
 -	orr	r3, r3, r4, lsl #20
 -	ldr	r5, [r2, r4, lsl #2]	@ save old mapping
 -	str	r3, [r2, r4, lsl #2]	@ setup 1:1 mapping for mmu code
 -	sub	r2, r2, r1
  	ldr	r3, =cpu_resume_after_mmu
 -	bic	r1, r0, #CR_C		@ ensure D-cache is disabled
 -	b	cpu_resume_turn_mmu_on
 -ENDPROC(cpu_resume_mmu)
 -	.ltorg
 -	.align	5
 -cpu_resume_turn_mmu_on:
+ 	instr_sync
 -	mcr	p15, 0, r1, c1, c0, 0	@ turn on MMU, I-cache, etc
 -	mrc	p15, 0, r1, c0, c0, 0	@ read id reg
 +	mcr	p15, 0, r0, c1, c0, 0	@ turn on MMU, I-cache, etc
 +	mrc	p15, 0, r0, c0, c0, 0	@ read id reg
+ 	instr_sync
 -	mov	r1, r1
 -	mov	r1, r1
 +	mov	r0, r0
 +	mov	r0, r0
  	mov	pc, r3			@ jump to virtual address
 -ENDPROC(cpu_resume_turn_mmu_on)
 +ENDPROC(cpu_resume_mmu)
  cpu_resume_after_mmu:
 -	str	r5, [r2, r4, lsl #2]	@ restore old mapping
 -	mcr	p15, 0, r0, c1, c0, 0	@ turn on D-cache
  	bl	cpu_init		@ restore the und/abt/irq banked regs
  	mov	r0, #0			@ return zero on success
  	ldmfd	sp!, {r4 - r11, pc}