From: Mauro Carvalho Chehab Date: Mon, 22 Sep 2014 20:48:01 +0000 (-0300) Subject: [media] au0828-cards: remove a comment about i2c clock stretching X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1ba3f927ad66759b0081fe1f96d77500c9a622c3;p=linux-beck.git [media] au0828-cards: remove a comment about i2c clock stretching This comment is already at the au0828-i2c where it belongs. So, remove it from a board's entry. It doesn't make any sense there, as we're setting the clock to 250kHz there, slowing it down only at the au0828-i2c. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index d229c6dbddb9..585a8f84228c 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -73,12 +73,6 @@ struct au0828_board au0828_boards[] = { .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, .has_ir_i2c = 1, - /* The au0828 hardware i2c implementation does not properly - support the xc5000's i2c clock stretching. So we need to - lower the clock frequency enough where the 15us clock - stretch fits inside of a normal clock cycle, or else the - au0828 fails to set the STOP bit. A 30 KHz clock puts the - clock pulse width at 18us */ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { {