From: Jonathan Corbet Date: Sat, 11 Jun 2011 17:46:47 +0000 (-0300) Subject: [media] marvell-cam: Right-shift i2c slave ID's in the cafe driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1c68f889c3287bd9beedd23164804e7e09c6566b;p=mv-sheeva.git [media] marvell-cam: Right-shift i2c slave ID's in the cafe driver This makes the cafe i2c implement consistent with the rest of Linux so that the core can use the same slave ID everywhere. Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/marvell-ccic/cafe-driver.c b/drivers/media/video/marvell-ccic/cafe-driver.c index 1027265d46a..3dbc7e55499 100644 --- a/drivers/media/video/marvell-ccic/cafe-driver.c +++ b/drivers/media/video/marvell-ccic/cafe-driver.c @@ -84,7 +84,14 @@ struct cafe_camera { #define TWSIC0_EN 0x00000001 /* TWSI enable */ #define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ #define TWSIC0_SID 0x000003fc /* Slave ID */ -#define TWSIC0_SID_SHIFT 2 +/* + * Subtle trickery: the slave ID field starts with bit 2. But the + * Linux i2c stack wants to treat the bottommost bit as a separate + * read/write bit, which is why slave ID's are usually presented + * >>1. For consistency with that behavior, we shift over three + * bits instead of two. + */ +#define TWSIC0_SID_SHIFT 3 #define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ #define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ #define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c index 0d602343555..d5f18a30009 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.c +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -1549,7 +1549,7 @@ int mccic_register(struct mcam_camera *cam) { struct i2c_board_info ov7670_info = { .type = "ov7670", - .addr = 0x42, + .addr = 0x42 >> 1, .platform_data = &sensor_cfg, }; int ret;