From: Amitkumar Karwar Date: Tue, 18 Feb 2014 23:41:56 +0000 (-0800) Subject: mwifiex: fix cmd and Tx data timeout issue for PCIe cards X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1c97560f6d751a620978504a4a888c631192b71a;p=linux-beck.git mwifiex: fix cmd and Tx data timeout issue for PCIe cards We are sending sleep confirm done interrupt in the middle of sleep handshake. There is a corner case when Tx done interrupt is received from firmware during sleep handshake due to which host and firmware power states go out of sync causing cmd and Tx data timeout problem. Hence sleep confirm done interrupt is sent at the end of sleep handshake to fix the problem. Cc: # 3.10+ Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 28029b7522c2..7fe7b53fb17a 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1531,6 +1531,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); + mwifiex_pcie_enable_host_int(adapter); + if (mwifiex_write_reg(adapter, + PCIE_CPU_INT_EVENT, + CPU_INTR_SLEEP_CFM_DONE)) { + dev_warn(adapter->dev, + "Write register failed\n"); + return -1; + } while (reg->sleep_cookie && (count++ < 10) && mwifiex_pcie_ok_to_access_hw(adapter)) usleep_range(50, 60); @@ -1999,23 +2007,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter) adapter->int_status |= pcie_ireg; spin_unlock_irqrestore(&adapter->int_lock, flags); - if (pcie_ireg & HOST_INTR_CMD_DONE) { - if ((adapter->ps_state == PS_STATE_SLEEP_CFM) || - (adapter->ps_state == PS_STATE_SLEEP)) { - mwifiex_pcie_enable_host_int(adapter); - if (mwifiex_write_reg(adapter, - PCIE_CPU_INT_EVENT, - CPU_INTR_SLEEP_CFM_DONE) - ) { - dev_warn(adapter->dev, - "Write register failed\n"); - return; - - } - } - } else if (!adapter->pps_uapsd_mode && - adapter->ps_state == PS_STATE_SLEEP && - mwifiex_pcie_ok_to_access_hw(adapter)) { + if (!adapter->pps_uapsd_mode && + adapter->ps_state == PS_STATE_SLEEP && + mwifiex_pcie_ok_to_access_hw(adapter)) { /* Potentially for PCIe we could get other * interrupts like shared. Don't change power * state until cookie is set */