From: Arik Nemtsov Date: Sat, 16 Oct 2010 15:44:51 +0000 (+0200) Subject: wl12xx: Add AP related configuration to conf_drv_settings X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1e05a81888318752e9a6d2158a95ddd6442ae117;p=mv-sheeva.git wl12xx: Add AP related configuration to conf_drv_settings Rate class configuration has been split up for AP and STA modes. Template related configuration likewise separated. Signed-off-by: Arik Nemtsov Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c index 17f6a63fbde..d6885d7c425 100644 --- a/drivers/net/wireless/wl12xx/acx.c +++ b/drivers/net/wireless/wl12xx/acx.c @@ -754,7 +754,7 @@ int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats) int wl1271_acx_rate_policies(struct wl1271 *wl) { struct acx_rate_policy *acx; - struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf; + struct conf_tx_rate_class *c = &wl->conf.tx.sta_rc_conf; int idx = 0; int ret = 0; diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c index 52a6bcd5c30..3b7b8f0a200 100644 --- a/drivers/net/wireless/wl12xx/cmd.c +++ b/drivers/net/wireless/wl12xx/cmd.c @@ -490,8 +490,8 @@ int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, cmd->len = cpu_to_le16(buf_len); cmd->template_type = template_id; cmd->enabled_rates = cpu_to_le32(rates); - cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit; - cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit; + cmd->short_retry_limit = wl->conf.tx.tmpl_short_retry_limit; + cmd->long_retry_limit = wl->conf.tx.tmpl_long_retry_limit; cmd->index = index; if (buf) diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index a16b3616e43..7563ce3a9f6 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -496,6 +496,26 @@ struct conf_rx_settings { CONF_HW_BIT_RATE_2MBPS) #define CONF_TX_RATE_RETRY_LIMIT 10 +/* + * Rates supported for data packets when operating as AP. Note the absense + * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop + * one. The rate dropped is not mandatory under any operating mode. + */ +#define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ + CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ + CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ + CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ + CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \ + CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ + CONF_HW_BIT_RATE_54MBPS) + +/* + * Default rates for management traffic when operating in AP mode. This + * should be configured according to the basic rate set of the AP + */ +#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ + CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) + struct conf_tx_rate_class { /* @@ -636,9 +656,9 @@ struct conf_tx_settings { /* * Configuration for rate classes for TX (currently only one - * rate class supported.) + * rate class supported). Used in non-AP mode. */ - struct conf_tx_rate_class rc_conf; + struct conf_tx_rate_class sta_rc_conf; /* * Configuration for access categories for TX rate control. @@ -646,6 +666,22 @@ struct conf_tx_settings { u8 ac_conf_count; struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; + /* + * Configuration for rate classes in AP-mode. These rate classes + * are for the AC TX queues + */ + struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT]; + + /* + * Management TX rate class for AP-mode. + */ + struct conf_tx_rate_class ap_mgmt_conf; + + /* + * Broadcast TX rate class for AP-mode. + */ + struct conf_tx_rate_class ap_bcst_conf; + /* * Configuration for TID parameters. */ @@ -687,6 +723,12 @@ struct conf_tx_settings { * Range: CONF_HW_BIT_RATE_* bit mask */ u32 basic_rate_5; + + /* + * TX retry limits for templates + */ + u8 tmpl_short_retry_limit; + u8 tmpl_long_retry_limit; }; enum { diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index 062247ef3ad..788959a5f0d 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -116,11 +116,11 @@ static struct conf_drv_settings default_conf = { }, .tx = { .tx_energy_detection = 0, - .rc_conf = { + .sta_rc_conf = { .enabled_rates = 0, .short_retry_limit = 10, .long_retry_limit = 10, - .aflags = 0 + .aflags = 0, }, .ac_conf_count = 4, .ac_conf = { @@ -153,6 +153,45 @@ static struct conf_drv_settings default_conf = { .tx_op_limit = 1504, }, }, + .ap_rc_conf = { + [0] = { + .enabled_rates = CONF_TX_AP_ENABLED_RATES, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + [1] = { + .enabled_rates = CONF_TX_AP_ENABLED_RATES, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + [2] = { + .enabled_rates = CONF_TX_AP_ENABLED_RATES, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + [3] = { + .enabled_rates = CONF_TX_AP_ENABLED_RATES, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + }, + .ap_mgmt_conf = { + .enabled_rates = CONF_TX_AP_DEFAULT_MGMT_RATES, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + .ap_bcst_conf = { + .enabled_rates = CONF_HW_BIT_RATE_1MBPS, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + .tid_conf_count = 4, .tid_conf = { [CONF_TX_AC_BE] = { @@ -193,6 +232,8 @@ static struct conf_drv_settings default_conf = { .tx_compl_threshold = 4, .basic_rate = CONF_HW_BIT_RATE_1MBPS, .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + .tmpl_short_retry_limit = 10, + .tmpl_long_retry_limit = 10, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM,