From: Patrice Chotard <patrice.chotard@st.com>
Date: Wed, 10 Aug 2016 13:12:58 +0000 (+0200)
Subject: pinctrl: st: Use second parameter to gpio specifier
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1e23437563dd3ad57e30c5d6c29995a982fd649b;p=linux-beck.git

pinctrl: st: Use second parameter to gpio specifier

This patch allows to use the second parameter of gpio
specifier, which is used to specify whether the gpio is
active high or low.

Simply remove specific of_xlate callback() and of_gpio_n_cells
and use default one set by of_gpiochip_add() which allows
to use second parameter gpio specifier.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
index 26bcb18f4e60..e6cc5e8f6438 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -50,7 +50,11 @@ Optional properties:
 GPIO controller/bank node.
 Required properties:
 - gpio-controller : Indicates this device is a GPIO controller
-- #gpio-cells	  : Should be one. The first cell is the pin number.
+- #gpio-cells	  : Must be two.
+     - First cell: specifies the pin number inside the controller
+     - Second cell: specifies whether the pin is logically inverted.
+       - 0 = active high
+       - 1 = active low
 - st,bank-name	  : Should be a name string for this bank as specified in
   datasheet.
 
@@ -88,7 +92,7 @@ Example:
 
 		PIO0: gpio@fe610000 {
 			gpio-controller;
-			#gpio-cells	= <1>;
+			#gpio-cells	= <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg		= <0 0x100>;
diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 0de1c67dfb94..2e5c545f5040 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -799,21 +799,6 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	return (direction == ST_GPIO_DIRECTION_IN);
 }
 
-static int st_gpio_xlate(struct gpio_chip *gc,
-			const struct of_phandle_args *gpiospec, u32 *flags)
-{
-	if (WARN_ON(gc->of_gpio_n_cells < 1))
-		return -EINVAL;
-
-	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
-		return -EINVAL;
-
-	if (gpiospec->args[0] > gc->ngpio)
-		return -EINVAL;
-
-	return gpiospec->args[0];
-}
-
 /* Pinctrl Groups */
 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
 {
@@ -1486,8 +1471,6 @@ static struct gpio_chip st_gpio_template = {
 	.direction_output	= st_gpio_direction_output,
 	.get_direction		= st_gpio_get_direction,
 	.ngpio			= ST_GPIO_PINS_PER_BANK,
-	.of_gpio_n_cells	= 1,
-	.of_xlate		= st_gpio_xlate,
 };
 
 static struct irq_chip st_gpio_irqchip = {