From: James Bottomley <James.Bottomley@suse.de>
Date: Sun, 23 Jan 2011 14:34:25 +0000 (-0600)
Subject: [SCSI] libsas: remove spurious sata control register read/write
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1e34c8387380269b9d7707d625aeb9e9e92233f0;p=mv-sheeva.git

[SCSI] libsas: remove spurious sata control register read/write

Originally, libata required the illusion that it could access the sata
control register.  Now, however, it can run perfectly well without
them, so remove the dummy routines from libsas which tried to emulate
them (but only ended up causing confusion).

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 4a6e203861d..c2a5cc75b40 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -301,55 +301,6 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
 	}
 }
 
-static int sas_ata_scr_write(struct ata_link *link, unsigned int sc_reg_in,
-			      u32 val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			dev->sata_dev.sstatus = val;
-			break;
-		case SCR_CONTROL:
-			dev->sata_dev.scontrol = val;
-			break;
-		case SCR_ERROR:
-			dev->sata_dev.serror = val;
-			break;
-		case SCR_ACTIVE:
-			dev->sata_dev.ap->link.sactive = val;
-			break;
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int sas_ata_scr_read(struct ata_link *link, unsigned int sc_reg_in,
-			    u32 *val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			*val = dev->sata_dev.sstatus;
-			return 0;
-		case SCR_CONTROL:
-			*val = dev->sata_dev.scontrol;
-			return 0;
-		case SCR_ERROR:
-			*val = dev->sata_dev.serror;
-			return 0;
-		case SCR_ACTIVE:
-			*val = dev->sata_dev.ap->link.sactive;
-			return 0;
-		default:
-			return -EINVAL;
-	}
-}
-
 static struct ata_port_operations sas_sata_ops = {
 	.phy_reset		= sas_ata_phy_reset,
 	.post_internal_cmd	= sas_ata_post_internal,
@@ -359,8 +310,6 @@ static struct ata_port_operations sas_sata_ops = {
 	.qc_fill_rtf		= sas_ata_qc_fill_rtf,
 	.port_start		= ata_sas_port_start,
 	.port_stop		= ata_sas_port_stop,
-	.scr_read		= sas_ata_scr_read,
-	.scr_write		= sas_ata_scr_write
 };
 
 static struct ata_port_info sata_port_info = {