From: Magnus Damm Date: Tue, 1 Oct 2013 08:12:19 +0000 (+0900) Subject: ARM: shmobile: r8a7791 IRQC platform device support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1e4953d817712e52616d9a40460435eb8881d32d;p=linux-beck.git ARM: shmobile: r8a7791 IRQC platform device support Add a platform device for the r8a7791 IRQC hardware driving IRQ pins IRQ0 to IRQ9. The Linux interrupt number is statically assigned to allow board code written in C to make use of static interrupt numbers. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index 350dfc4918e3..ba4fa3edf44f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -109,6 +110,31 @@ static const struct resource cmt00_resources[] __initconst = { &cmt##idx##_platform_data, \ sizeof(struct sh_timer_config)) +static struct renesas_irqc_config irqc0_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */ +}; + +static struct resource irqc0_resources[] = { + DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ + DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */ +}; + +#define r8a7791_register_irqc(idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) + void __init r8a7791_add_dt_devices(void) { r8a7791_register_scif(SCIFA0); @@ -132,6 +158,7 @@ void __init r8a7791_add_dt_devices(void) void __init r8a7791_add_standard_devices(void) { r8a7791_add_dt_devices(); + r8a7791_register_irqc(0); } void __init r8a7791_init_early(void)