From: Denys Vlasenko Date: Fri, 2 May 2014 15:04:00 +0000 (+0200) Subject: uprobes/x86: Fix scratch register selection for rip-relative fixups X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1ea30fb64598bd3a6ba43d874bb53c55878eaef5;p=linux-beck.git uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko Reviewed-by: Jim Keniston Signed-off-by: Oleg Nesterov --- diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 31dcb4d5ea46..159ca520ef5b 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -41,8 +41,11 @@ /* Instruction will modify TF, don't change it */ #define UPROBE_FIX_SETF 0x04 -#define UPROBE_FIX_RIP_AX 0x08 -#define UPROBE_FIX_RIP_CX 0x10 +#define UPROBE_FIX_RIP_SI 0x08 +#define UPROBE_FIX_RIP_DI 0x10 +#define UPROBE_FIX_RIP_BX 0x20 +#define UPROBE_FIX_RIP_MASK \ + (UPROBE_FIX_RIP_SI | UPROBE_FIX_RIP_DI | UPROBE_FIX_RIP_BX) #define UPROBE_TRAP_NR UINT_MAX @@ -275,20 +278,109 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn) { u8 *cursor; u8 reg; + u8 reg2; if (!insn_rip_relative(insn)) return; /* - * insn_rip_relative() would have decoded rex_prefix, modrm. + * insn_rip_relative() would have decoded rex_prefix, vex_prefix, modrm. * Clear REX.b bit (extension of MODRM.rm field): - * we want to encode rax/rcx, not r8/r9. + * we want to encode low numbered reg, not r8+. */ if (insn->rex_prefix.nbytes) { cursor = auprobe->insn + insn_offset_rex_prefix(insn); - *cursor &= 0xfe; /* Clearing REX.B bit */ + /* REX byte has 0100wrxb layout, clearing REX.b bit */ + *cursor &= 0xfe; } + /* + * Similar treatment for VEX3 prefix. + * TODO: add XOP/EVEX treatment when insn decoder supports them + */ + if (insn->vex_prefix.nbytes == 3) { + /* + * vex2: c5 rvvvvLpp (has no b bit) + * vex3/xop: c4/8f rxbmmmmm wvvvvLpp + * evex: 62 rxbR00mm wvvvv1pp zllBVaaa + * (evex will need setting of both b and x since + * in non-sib encoding evex.x is 4th bit of MODRM.rm) + * Setting VEX3.b (setting because it has inverted meaning): + */ + cursor = auprobe->insn + insn_offset_vex_prefix(insn) + 1; + *cursor |= 0x20; + } + + /* + * Convert from rip-relative addressing to register-relative addressing + * via a scratch register. + * + * This is tricky since there are insns with modrm byte + * which also use registers not encoded in modrm byte: + * [i]div/[i]mul: implicitly use dx:ax + * shift ops: implicitly use cx + * cmpxchg: implicitly uses ax + * cmpxchg8/16b: implicitly uses dx:ax and bx:cx + * Encoding: 0f c7/1 modrm + * The code below thinks that reg=1 (cx), chooses si as scratch. + * mulx: implicitly uses dx: mulx r/m,r1,r2 does r1:r2 = dx * r/m. + * First appeared in Haswell (BMI2 insn). It is vex-encoded. + * Example where none of bx,cx,dx can be used as scratch reg: + * c4 e2 63 f6 0d disp32 mulx disp32(%rip),%ebx,%ecx + * [v]pcmpistri: implicitly uses cx, xmm0 + * [v]pcmpistrm: implicitly uses xmm0 + * [v]pcmpestri: implicitly uses ax, dx, cx, xmm0 + * [v]pcmpestrm: implicitly uses ax, dx, xmm0 + * Evil SSE4.2 string comparison ops from hell. + * maskmovq/[v]maskmovdqu: implicitly uses (ds:rdi) as destination. + * Encoding: 0f f7 modrm, 66 0f f7 modrm, vex-encoded: c5 f9 f7 modrm. + * Store op1, byte-masked by op2 msb's in each byte, to (ds:rdi). + * AMD says it has no 3-operand form (vex.vvvv must be 1111) + * and that it can have only register operands, not mem + * (its modrm byte must have mode=11). + * If these restrictions will ever be lifted, + * we'll need code to prevent selection of di as scratch reg! + * + * Summary: I don't know any insns with modrm byte which + * use SI register implicitly. DI register is used only + * by one insn (maskmovq) and BX register is used + * only by one too (cmpxchg8b). + * BP is stack-segment based (may be a problem?). + * AX, DX, CX are off-limits (many implicit users). + * SP is unusable (it's stack pointer - think about "pop mem"; + * also, rsp+disp32 needs sib encoding -> insn length change). + */ + reg = MODRM_REG(insn); /* Fetch modrm.reg */ + reg2 = 0xff; /* Fetch vex.vvvv */ + if (insn->vex_prefix.nbytes == 2) + reg2 = insn->vex_prefix.bytes[1]; + else if (insn->vex_prefix.nbytes == 3) + reg2 = insn->vex_prefix.bytes[2]; + /* + * TODO: add XOP, EXEV vvvv reading. + * + * vex.vvvv field is in bits 6-3, bits are inverted. + * But in 32-bit mode, high-order bit may be ignored. + * Therefore, let's consider only 3 low-order bits. + */ + reg2 = ((reg2 >> 3) & 0x7) ^ 0x7; + /* + * Register numbering is ax,cx,dx,bx, sp,bp,si,di, r8..r15. + * + * Choose scratch reg. Order is important: must not select bx + * if we can use si (cmpxchg8b case!) + */ + if (reg != 6 && reg2 != 6) { + reg2 = 6; + auprobe->def.fixups |= UPROBE_FIX_RIP_SI; + } else if (reg != 7 && reg2 != 7) { + reg2 = 7; + auprobe->def.fixups |= UPROBE_FIX_RIP_DI; + /* TODO (paranoia): force maskmovq to not use di */ + } else { + reg2 = 3; + auprobe->def.fixups |= UPROBE_FIX_RIP_BX; + } /* * Point cursor at the modrm byte. The next 4 bytes are the * displacement. Beyond the displacement, for some instructions, @@ -296,41 +388,21 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn) */ cursor = auprobe->insn + insn_offset_modrm(insn); /* - * Convert from rip-relative addressing - * to register-relative addressing via a scratch register. + * Change modrm from "00 reg 101" to "10 reg reg2". Example: + * 89 05 disp32 mov %eax,disp32(%rip) becomes + * 89 86 disp32 mov %eax,disp32(%rsi) */ - reg = MODRM_REG(insn); - if (reg == 0) { - /* - * The register operand (if any) is either the A register - * (%rax, %eax, etc.) or (if the 0x4 bit is set in the - * REX prefix) %r8. In any case, we know the C register - * is NOT the register operand, so we use %rcx (register - * #1) for the scratch register. - */ - auprobe->def.fixups |= UPROBE_FIX_RIP_CX; - /* - * Change modrm from "00 000 101" to "10 000 001". Example: - * 89 05 disp32 mov %eax,disp32(%rip) becomes - * 89 81 disp32 mov %eax,disp32(%rcx) - */ - *cursor = 0x81; - } else { - /* Use %rax (register #0) for the scratch register. */ - auprobe->def.fixups |= UPROBE_FIX_RIP_AX; - /* - * Change modrm from "00 reg 101" to "10 reg 000". Example: - * 89 1d disp32 mov %edx,disp32(%rip) becomes - * 89 98 disp32 mov %edx,disp32(%rax) - */ - *cursor = (reg << 3) | 0x80; - } + *cursor = 0x80 | (reg << 3) | reg2; } static inline unsigned long * scratch_reg(struct arch_uprobe *auprobe, struct pt_regs *regs) { - return (auprobe->def.fixups & UPROBE_FIX_RIP_AX) ? ®s->ax : ®s->cx; + if (auprobe->def.fixups & UPROBE_FIX_RIP_SI) + return ®s->si; + if (auprobe->def.fixups & UPROBE_FIX_RIP_DI) + return ®s->di; + return ®s->bx; } /* @@ -339,7 +411,7 @@ scratch_reg(struct arch_uprobe *auprobe, struct pt_regs *regs) */ static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { - if (auprobe->def.fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) { + if (auprobe->def.fixups & UPROBE_FIX_RIP_MASK) { struct uprobe_task *utask = current->utask; unsigned long *sr = scratch_reg(auprobe, regs); @@ -350,7 +422,7 @@ static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { - if (auprobe->def.fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) { + if (auprobe->def.fixups & UPROBE_FIX_RIP_MASK) { struct uprobe_task *utask = current->utask; unsigned long *sr = scratch_reg(auprobe, regs); @@ -405,6 +477,23 @@ static int push_ret_address(struct pt_regs *regs, unsigned long ip) return 0; } +/* + * We have to fix things up as follows: + * + * Typically, the new ip is relative to the copied instruction. We need + * to make it relative to the original instruction (FIX_IP). Exceptions + * are return instructions and absolute or indirect jump or call instructions. + * + * If the single-stepped instruction was a call, the return address that + * is atop the stack is the address following the copied instruction. We + * need to make it the address following the original instruction (FIX_CALL). + * + * If the original instruction was a rip-relative instruction such as + * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent + * instruction using a scratch register -- e.g., "movl %edx,0xnnnn(%rsi)". + * We need to restore the contents of the scratch register + * (FIX_RIP_reg). + */ static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) { struct uprobe_task *utask = current->utask; @@ -711,21 +800,6 @@ bool arch_uprobe_xol_was_trapped(struct task_struct *t) * single-step, we single-stepped a copy of the instruction. * * This function prepares to resume execution after the single-step. - * We have to fix things up as follows: - * - * Typically, the new ip is relative to the copied instruction. We need - * to make it relative to the original instruction (FIX_IP). Exceptions - * are return instructions and absolute or indirect jump or call instructions. - * - * If the single-stepped instruction was a call, the return address that - * is atop the stack is the address following the copied instruction. We - * need to make it the address following the original instruction (FIX_CALL). - * - * If the original instruction was a rip-relative instruction such as - * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent - * instruction using a scratch register -- e.g., "movl %edx,0xnnnn(%rax)". - * We need to restore the contents of the scratch register - * (FIX_RIP_AX or FIX_RIP_CX). */ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) {