From: Roger Quadros Date: Tue, 12 Mar 2013 11:24:19 +0000 (+0200) Subject: usb: phy: nop: Add some parameters to platform data X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1f0972f5b05a674d73e4eb314fa1b6c78e37aef1;p=linux-beck.git usb: phy: nop: Add some parameters to platform data Add clk_rate parameter to platform data. If supplied, the NOP phy driver will program the clock to that rate during probe. Also add 2 flags, needs_vcc and needs_reset. If the flag is set and the regulator couldn't be found then the driver will bail out with -EPROBE_DEFER. Signed-off-by: Roger Quadros Acked-by: Felipe Balbi Signed-off-by: Felipe Balbi --- diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h index 28884c717411..148d35171aac 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/nop-usb-xceiv.h @@ -5,6 +5,11 @@ struct nop_usb_xceiv_platform_data { enum usb_phy_type type; + unsigned long clk_rate; + + /* if set fails with -EPROBE_DEFER if can't get regulator */ + unsigned int needs_vcc:1; + unsigned int needs_reset:1; }; #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))