From: Xu, Hong Date: Tue, 2 Aug 2011 01:05:04 +0000 (+0000) Subject: AT91: Small fix on AT91 USART initialization code X-Git-Tag: v2012.10-rc1~122 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1f4faedd51ee72a57afb9edba2d71ba01a2ec20e;p=karo-tx-uboot.git AT91: Small fix on AT91 USART initialization code Before reset dbgu transmitter, we just wait TXEMPTY to drain the transmitter register(Just in case). If not doing this, we may sometimes see several weird characters from DBGU. A short delay is also added to make sure the new serial settings are settled. Signed-off-by: Hong Xu [cherry-picked from u-boot-atmel/old-next] Signed-off-by: Andreas Bießmann --- diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index e326b2bcff..943ef70fa6 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -49,17 +49,26 @@ int serial_init(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; + /* + * Just in case: drain transmitter register + * 1000us is enough for baudrate >= 9600 + */ + if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY))) + __udelay(1000); + writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); serial_setbrg(); - writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | USART3_BF(USCLKS, USART3_USCLKS_MCK) | USART3_BF(CHRL, USART3_CHRL_8) | USART3_BF(PAR, USART3_PAR_NONE) | USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr); + writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); + /* 100us is enough for the new settings to be settled */ + __udelay(100); return 0; }