From: Laurent Pinchart Date: Wed, 21 Sep 2011 23:05:45 +0000 (-0300) Subject: [media] omap3isp: preview: Add crop support on the sink pad X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1f69fd970dfdd9872c83f62864b2557d686948cb;p=linux-beck.git [media] omap3isp: preview: Add crop support on the sink pad The crop rectangle takes the preview engine internal cropping requirements into account. The smallest allowable margins are 14 columns and 8 rows when reading from memory, and 18 columns and 8 rows when processing data on the fly from the CCDC. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index d5cce423283c..ccb876fe023f 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -76,6 +76,42 @@ static struct omap3isp_prev_csc flr_prev_csc = { #define DEF_DETECT_CORRECT_VAL 0xe +/* + * Margins and image size limits. + * + * The preview engine crops several rows and columns internally depending on + * which filters are enabled. To avoid format changes when the filters are + * enabled or disabled (which would prevent them from being turned on or off + * during streaming), the driver assumes all the filters are enabled when + * computing sink crop and source format limits. + * + * If a filter is disabled, additional cropping is automatically added at the + * preview engine input by the driver to avoid overflow at line and frame end. + * This is completely transparent for applications. + * + * Median filter 4 pixels + * Noise filter, + * Faulty pixels correction 4 pixels, 4 lines + * CFA filter 4 pixels, 4 lines in Bayer mode + * 2 lines in other modes + * Color suppression 2 pixels + * or luma enhancement + * ------------------------------------------------------------- + * Maximum total 14 pixels, 8 lines + * + * The color suppression and luma enhancement filters are applied after bayer to + * YUV conversion. They thus can crop one pixel on the left and one pixel on the + * right side of the image without changing the color pattern. When both those + * filters are disabled, the driver must crop the two pixels on the same side of + * the image to avoid changing the bayer pattern. The left margin is thus set to + * 8 pixels and the right margin to 6 pixels. + */ + +#define PREV_MARGIN_LEFT 8 +#define PREV_MARGIN_RIGHT 6 +#define PREV_MARGIN_TOP 4 +#define PREV_MARGIN_BOTTOM 4 + #define PREV_MIN_IN_WIDTH 64 #define PREV_MIN_IN_HEIGHT 8 #define PREV_MAX_IN_HEIGHT 16384 @@ -985,52 +1021,36 @@ static void preview_config_averager(struct isp_prev_device *prev, u8 average) * enabled when reporting source pad formats to userspace. If this assumption is * not true, rows and columns must be manually cropped at the preview engine * input to avoid overflows at the end of lines and frames. + * + * See the explanation at the PREV_MARGIN_* definitions for more details. */ static void preview_config_input_size(struct isp_prev_device *prev) { struct isp_device *isp = to_isp_device(prev); struct prev_params *params = &prev->params; - struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK]; - unsigned int sph = 0; - unsigned int eph = format->width - 1; - unsigned int slv = 0; - unsigned int elv = format->height - 1; - - if (prev->input == PREVIEW_INPUT_CCDC) { - sph += 2; - eph -= 2; - } - - /* - * Median filter 4 pixels - * Noise filter 4 pixels, 4 lines - * or faulty pixels correction - * CFA filter 4 pixels, 4 lines in Bayer mode - * 2 lines in other modes - * Color suppression 2 pixels - * or luma enhancement - * ------------------------------------------------------------- - * Maximum total 14 pixels, 8 lines - */ - - if (!(params->features & PREV_CFA)) { - sph += 2; - eph -= 2; - slv += 2; - elv -= 2; + unsigned int sph = prev->crop.left; + unsigned int eph = prev->crop.left + prev->crop.width - 1; + unsigned int slv = prev->crop.top; + unsigned int elv = prev->crop.top + prev->crop.height - 1; + + if (params->features & PREV_CFA) { + sph -= 2; + eph += 2; + slv -= 2; + elv += 2; } - if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) { - sph += 2; - eph -= 2; - slv += 2; - elv -= 2; + if (params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER)) { + sph -= 2; + eph += 2; + slv -= 2; + elv += 2; } - if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) { - sph += 2; - eph -= 2; + if (params->features & PREV_HORZ_MEDIAN_FILTER) { + sph -= 2; + eph += 2; } - if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE))) - sph += 2; + if (params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE)) + sph -= 2; isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph, OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO); @@ -1597,6 +1617,16 @@ __preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, return &prev->formats[pad]; } +static struct v4l2_rect * +__preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_crop(fh, PREV_PAD_SINK); + else + return &prev->crop; +} + /* previewer format descriptions */ static const unsigned int preview_input_fmts[] = { V4L2_MBUS_FMT_SGRBG10_1X10, @@ -1611,19 +1641,23 @@ static const unsigned int preview_output_fmts[] = { }; /* - * preview_try_format - Handle try format by pad subdev method - * @prev: ISP preview device - * @fh : V4L2 subdev file handle - * @pad: pad num - * @fmt: pointer to v4l2 format structure + * preview_try_format - Validate a format + * @prev: ISP preview engine + * @fh: V4L2 subdev file handle + * @pad: pad number + * @fmt: format to be validated + * @which: try/active format selector + * + * Validate and adjust the given format for the given pad based on the preview + * engine limits and the format and crop rectangles on other pads. */ static void preview_try_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, unsigned int pad, struct v4l2_mbus_framefmt *fmt, enum v4l2_subdev_format_whence which) { - struct v4l2_mbus_framefmt *format; enum v4l2_mbus_pixelcode pixelcode; + struct v4l2_rect *crop; unsigned int i; switch (pad) { @@ -1659,15 +1693,8 @@ static void preview_try_format(struct isp_prev_device *prev, case PREV_PAD_SOURCE: pixelcode = fmt->code; - format = __preview_get_format(prev, fh, PREV_PAD_SINK, which); - memcpy(fmt, format, sizeof(*fmt)); + *fmt = *__preview_get_format(prev, fh, PREV_PAD_SINK, which); - /* The preview module output size is configurable through the - * input interface (horizontal and vertical cropping) and the - * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In - * spite of this, hardcode the output size to the biggest - * possible value for simplicity reasons. - */ switch (pixelcode) { case V4L2_MBUS_FMT_YUYV8_1X16: case V4L2_MBUS_FMT_UYVY8_1X16: @@ -1679,20 +1706,14 @@ static void preview_try_format(struct isp_prev_device *prev, break; } - /* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped - * from the left and right sides when the input source is the - * CCDC. This seems not to be needed in practice, investigation - * is required. - */ - if (prev->input == PREVIEW_INPUT_CCDC) - fmt->width -= 4; - - /* Assume that all blocks are enabled and crop pixels and lines - * accordingly. See preview_config_input_size() for more - * information. + /* The preview module output size is configurable through the + * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This + * is not supported yet, hardcode the output size to the crop + * rectangle size. */ - fmt->width -= 14; - fmt->height -= 8; + crop = __preview_get_crop(prev, fh, which); + fmt->width = crop->width; + fmt->height = crop->height; fmt->colorspace = V4L2_COLORSPACE_JPEG; break; @@ -1701,6 +1722,49 @@ static void preview_try_format(struct isp_prev_device *prev, fmt->field = V4L2_FIELD_NONE; } +/* + * preview_try_crop - Validate a crop rectangle + * @prev: ISP preview engine + * @sink: format on the sink pad + * @crop: crop rectangle to be validated + * + * The preview engine crops lines and columns for its internal operation, + * depending on which filters are enabled. Enforce minimum crop margins to + * handle that transparently for userspace. + * + * See the explanation at the PREV_MARGIN_* definitions for more details. + */ +static void preview_try_crop(struct isp_prev_device *prev, + const struct v4l2_mbus_framefmt *sink, + struct v4l2_rect *crop) +{ + unsigned int left = PREV_MARGIN_LEFT; + unsigned int right = sink->width - PREV_MARGIN_RIGHT; + unsigned int top = PREV_MARGIN_TOP; + unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM; + + /* When processing data on-the-fly from the CCDC, at least 2 pixels must + * be cropped from the left and right sides of the image. As we don't + * know which filters will be enabled, increase the left and right + * margins by two. + */ + if (prev->input == PREVIEW_INPUT_CCDC) { + left += 2; + right -= 2; + } + + /* Restrict left/top to even values to keep the Bayer pattern. */ + crop->left &= ~1; + crop->top &= ~1; + + crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH); + crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT); + crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH, + right - crop->left); + crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT, + bottom - crop->top); +} + /* * preview_enum_mbus_code - Handle pixel format enumeration * @sd : pointer to v4l2 subdev structure @@ -1762,6 +1826,60 @@ static int preview_enum_frame_size(struct v4l2_subdev *sd, return 0; } +/* + * preview_get_crop - Retrieve the crop rectangle on a pad + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * @crop: crop rectangle + * + * Return 0 on success or a negative error code otherwise. + */ +static int preview_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + + /* Cropping is only supported on the sink pad. */ + if (crop->pad != PREV_PAD_SINK) + return -EINVAL; + + crop->rect = *__preview_get_crop(prev, fh, crop->which); + return 0; +} + +/* + * preview_set_crop - Retrieve the crop rectangle on a pad + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * @crop: crop rectangle + * + * Return 0 on success or a negative error code otherwise. + */ +static int preview_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + /* Cropping is only supported on the sink pad. */ + if (crop->pad != PREV_PAD_SINK) + return -EINVAL; + + /* The crop rectangle can't be changed while streaming. */ + if (prev->state != ISP_PIPELINE_STREAM_STOPPED) + return -EBUSY; + + format = __preview_get_format(prev, fh, PREV_PAD_SINK, crop->which); + preview_try_crop(prev, format, &crop->rect); + *__preview_get_crop(prev, fh, crop->which) = crop->rect; + + /* Update the source format. */ + format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, crop->which); + preview_try_format(prev, fh, PREV_PAD_SOURCE, format, crop->which); + + return 0; +} + /* * preview_get_format - Handle get format by pads subdev method * @sd : pointer to v4l2 subdev structure @@ -1795,6 +1913,7 @@ static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, { struct isp_prev_device *prev = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; format = __preview_get_format(prev, fh, fmt->pad, fmt->which); if (format == NULL) @@ -1805,9 +1924,18 @@ static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, /* Propagate the format from sink to source */ if (fmt->pad == PREV_PAD_SINK) { + /* Reset the crop rectangle. */ + crop = __preview_get_crop(prev, fh, fmt->which); + crop->left = 0; + crop->top = 0; + crop->width = fmt->format.width; + crop->height = fmt->format.height; + + preview_try_crop(prev, &fmt->format, crop); + + /* Update the source format. */ format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, fmt->which); - *format = fmt->format; preview_try_format(prev, fh, PREV_PAD_SOURCE, format, fmt->which); } @@ -1856,6 +1984,8 @@ static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = { .enum_frame_size = preview_enum_frame_size, .get_fmt = preview_get_format, .set_fmt = preview_set_format, + .get_crop = preview_get_crop, + .set_crop = preview_set_crop, }; /* subdev operations */ diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h index 272a44a2b9bc..f54e775c2df4 100644 --- a/drivers/media/video/omap3isp/isppreview.h +++ b/drivers/media/video/omap3isp/isppreview.h @@ -152,6 +152,7 @@ struct isptables_update { * @subdev: V4L2 subdevice * @pads: Media entity pads * @formats: Active formats at the subdev pad + * @crop: Active crop rectangle * @input: Module currently connected to the input pad * @output: Bitmask of the active output * @video_in: Input video entity @@ -170,6 +171,7 @@ struct isp_prev_device { struct v4l2_subdev subdev; struct media_pad pads[PREV_PADS_NUM]; struct v4l2_mbus_framefmt formats[PREV_PADS_NUM]; + struct v4l2_rect crop; struct v4l2_ctrl_handler ctrls;