From: Grygorii Strashko Date: Fri, 24 Jun 2016 18:23:41 +0000 (+0300) Subject: drivers: net: cpsw: fix suspend when all ethX devices are down X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1f95ba000c92cafccea007129d40532a4f35b1a6;p=linux-beck.git drivers: net: cpsw: fix suspend when all ethX devices are down The cpsw_suspend() could trigger L3 error and CPSW will stop functioning if System enters suspend when all ethX net-devices are down - in this case CPSW could be already suspended by PM runtime, but cpsw_suspend() will try to call soft_reset_slave() unconditionally and access CPSW registers. Hence, fix it by moving soft_reset_slave() from cpsw_suspend() to cpsw_slave_stop(). This way slave ports will be reset when CPSW is active and will be in proper state during Suspend. Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 9c924f15cd03..6e0f0c6636db 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1243,6 +1243,7 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_priv *priv) slave->phy = NULL; cpsw_ale_control_set(priv->ale, slave_port, ALE_PORT_STATE, ALE_PORT_STATE_DISABLE); + soft_reset_slave(slave); } static int cpsw_ndo_open(struct net_device *ndev) @@ -2548,12 +2549,10 @@ static int cpsw_suspend(struct device *dev) for (i = 0; i < priv->data.slaves; i++) { if (netif_running(priv->slaves[i].ndev)) cpsw_ndo_stop(priv->slaves[i].ndev); - soft_reset_slave(priv->slaves + i); } } else { if (netif_running(ndev)) cpsw_ndo_stop(ndev); - for_each_slave(priv, soft_reset_slave); } pm_runtime_put_sync(&pdev->dev);