From: Laurent Pinchart Date: Fri, 19 Apr 2013 11:29:48 +0000 (+0200) Subject: ARM: shmobile: ap4evb: Register pinctrl mapping for FSI X-Git-Tag: next-20130527~8^2^13~79 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1fa6223dece0ea4723cefcbd1827d5a306eef798;p=karo-tx-linux.git ARM: shmobile: ap4evb: Register pinctrl mapping for FSI Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f42e731e1694..2f03685607fa 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1089,6 +1089,16 @@ static const struct pinctrl_map ap4evb_pinctrl_map[] = { /* CEU */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", "ceu_clk_0", "ceu"), + /* FSIA (AK4643) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_out", "fsia"), + /* FSIB (HDMI) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", + "fsib_mclk_in", "fsib"), /* MMCIF */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", "mmc0_data8_0", "mmc0"), @@ -1165,11 +1175,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* FSI2 port A (ak4643) */ gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(9, NULL); @@ -1180,8 +1186,7 @@ static void __init ap4evb_init(void) /* card detect pin for MMC slot (CN7) */ gpio_request_one(41, GPIOF_IN, NULL); - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); + /* FSI2 port B (HDMI) */ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ /* set SPU2 clock to 119.6 MHz */