From: Russell King Date: Wed, 13 Dec 2006 14:45:46 +0000 (+0000) Subject: [PATCH] Add support for Korenix 16C950-based PCI cards X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1fb8cacc19dfe408a5dd758235561c58cadea174;p=linux-beck.git [PATCH] Add support for Korenix 16C950-based PCI cards This adds initial support to 8250-pci for the Korenix Jetcard PCI serial cards. The JC12xx cards are standard RS232-based serial cards utilising the Oxford 16C950 device. The JC14xx are RS422/RS485-based cards, but in order for these to be supported natively, we will need additional tweaks to the 8250 layers so we can specify some values for the 950's registers. Hence, these two entries are commented out. Signed-off-by: Russell King Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 4d0ff8f4a01b..52e2e64c6649 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2238,6 +2238,30 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_1_460800 }, + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com */