From: Mark Lord Date: Mon, 6 Apr 2009 19:24:57 +0000 (-0400) Subject: sata_mv: workaround errata SATA#26 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2009177329ae565d9e9efd31b399d2f4ed4f0c44;p=linux-beck.git sata_mv: workaround errata SATA#26 Workaround for errata SATA#26. Prevents accidently putting a drive to sleep when attempting COMRESET, by ORing 0xf000 with the values written to SCR_CONTROL. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b0c929d36234..d689fb9ceb96 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1296,7 +1296,25 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) unsigned int ofs = mv_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) { - writelfl(val, mv_ap_base(link->ap) + ofs); + void __iomem *addr = mv_ap_base(link->ap) + ofs; + if (sc_reg_in == SCR_CONTROL) { + /* + * Workaround for 88SX60x1 FEr SATA#26: + * + * COMRESETs have to take care not to accidently + * put the drive to sleep when writing SCR_CONTROL. + * Setting bits 12..15 prevents this problem. + * + * So if we see an outbound COMMRESET, set those bits. + * Ditto for the followup write that clears the reset. + * + * The proprietary driver does this for + * all chip versions, and so do we. + */ + if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) + val |= 0xf000; + } + writelfl(val, addr); return 0; } else return -EINVAL;