From: Yuval Mintz Date: Thu, 9 Aug 2012 04:37:26 +0000 (+0000) Subject: bnx2x: Fix recovery flow cleanup during probe X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2070ffa2c8d4dc17cd8fc4b30d2710bcde27b051;p=linux-beck.git bnx2x: Fix recovery flow cleanup during probe During probe, every function probed clears the recovery registers from all functions on its path - thus signaling that given a future recovery event, there will be no need to wait for those functions. This is a flawed behaviour - each function should only be responsible for its own bit. Since this registers are handled during the load/unload routines, this cleanup is removed altogether. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5384a6dd155f..02b5a343b195 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4041,20 +4041,6 @@ static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) return val != 0; } -/* - * Reset the load status for the current engine. - */ -static void bnx2x_clear_load_status(struct bnx2x *bp) -{ - u32 val; - u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : - BNX2X_PATH0_LOAD_CNT_MASK); - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); - val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); - REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask)); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); -} - static void _print_next_block(int idx, const char *blk) { pr_cont("%s%s", idx ? ", " : "", blk); @@ -11428,9 +11414,6 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, if (!chip_is_e1x) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); - /* Reset the load counter */ - bnx2x_clear_load_status(bp); - dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &bnx2x_netdev_ops;