From: Colin Cronin Date: Mon, 18 May 2015 18:41:43 +0000 (-0700) Subject: Drivers: gpio: Fix spelling errors X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=20a8a96873f69dc915e872e291f4376f436b295a;p=linux-beck.git Drivers: gpio: Fix spelling errors Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x, gpio-tegra, gpio-zynq, gpiolib-of, gpiolib. Signed-off-by: Colin Cronin Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c index 127c755b38dc..153af464c7a7 100644 --- a/drivers/gpio/gpio-lynxpoint.c +++ b/drivers/gpio/gpio-lynxpoint.c @@ -72,7 +72,7 @@ struct lp_gpio { * * per gpio specific registers consist of two 32bit registers per gpio * (LP_CONFIG1 and LP_CONFIG2), with 94 gpios there's a total of - * 188 config registes. + * 188 config registers. * * A simplified view of the register layout look like this: * diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index e2da64abbccd..eed42035207d 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -630,7 +630,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert) memset(val, 0, NBANK(chip)); pca953x_write_regs(chip, PCA957X_INVRT, val); - /* To enable register 6, 7 to controll pull up and pull down */ + /* To enable register 6, 7 to control pull up and pull down */ memset(val, 0x02, NBANK(chip)); pca953x_write_regs(chip, PCA957X_BKEN, val); diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 1741981d53c8..a19f81a661b4 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -288,7 +288,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio)); /* if gpio is edge triggered, clear condition - * before executing the hander so that we don't + * before executing the handler so that we don't * miss edges */ if (lvl & (0x100 << pin)) { diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index 184c4b1b2558..0d9663f53834 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -335,7 +335,7 @@ static void zynq_gpio_irq_ack(struct irq_data *irq_data) * @irq_data: irq data containing irq number of gpio pin for the interrupt * to enable * - * Clears the INTSTS bit and unmasks the given interrrupt. + * Clears the INTSTS bit and unmasks the given interrupt. */ static void zynq_gpio_irq_enable(struct irq_data *irq_data) { diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index a6c67c6b4680..9a0ec48a4737 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -242,7 +242,7 @@ int of_gpio_simple_xlate(struct gpio_chip *gc, { /* * We're discouraging gpio_cells < 2, since that way you'll have to - * write your own xlate function (that will have to retrive the GPIO + * write your own xlate function (that will have to retrieve the GPIO * number and the flags from a single gpio cell -- this is possible, * but not recommended). */ diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 59cb4303e251..e01f6b2bfb3a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -617,7 +617,7 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip, of_node = gpiochip->dev->of_node; #ifdef CONFIG_OF_GPIO /* - * If the gpiochip has an assigned OF node this takes precendence + * If the gpiochip has an assigned OF node this takes precedence * FIXME: get rid of this and use gpiochip->dev->of_node everywhere */ if (gpiochip->of_node) @@ -1220,7 +1220,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_value); /* * _gpio_set_open_drain_value() - Set the open drain gpio's value. * @desc: gpio descriptor whose state need to be set. - * @value: Non-zero for setting it HIGH otherise it will set to LOW. + * @value: Non-zero for setting it HIGH otherwise it will set to LOW. */ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value) { @@ -1247,7 +1247,7 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value) /* * _gpio_set_open_source_value() - Set the open source gpio's value. * @desc: gpio descriptor whose state need to be set. - * @value: Non-zero for setting it HIGH otherise it will set to LOW. + * @value: Non-zero for setting it HIGH otherwise it will set to LOW. */ static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value) { @@ -1889,7 +1889,7 @@ EXPORT_SYMBOL_GPL(gpiod_count); * * Return the GPIO descriptor corresponding to the function con_id of device * dev, -ENOENT if no GPIO has been assigned to the requested function, or - * another IS_ERR() code if an error occured while trying to acquire the GPIO. + * another IS_ERR() code if an error occurred while trying to acquire the GPIO. */ struct gpio_desc *__must_check __gpiod_get(struct device *dev, const char *con_id, enum gpiod_flags flags) @@ -1969,7 +1969,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, * * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the * requested function and/or index, or another IS_ERR() code if an error - * occured while trying to acquire the GPIO. + * occurred while trying to acquire the GPIO. */ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev, const char *con_id,