From: Curt Meyers Date: Mon, 27 Feb 2006 03:08:39 +0000 (-0300) Subject: V4L/DVB (3366): Kworld ATSC110: initialize the tuner for analog mode on module load X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=20b5ee5d491238b8de7ba0c06945d8e3935d42e6;p=linux-beck.git V4L/DVB (3366): Kworld ATSC110: initialize the tuner for analog mode on module load - Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the tuner can be identified when tuners.ko loads. - With this change it is no longer necessary to remove and reload the tuner module in order to get the tuv1236 identified. - This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c) which also uses the TUV1236D. Signed-off-by: Curt Meyers Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 99cefdd077ab..e1145a84b03e 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3549,6 +3549,18 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); } break; + case SAA7134_BOARD_KWORLD_ATSC110: + { + /* enable tuner */ + int i; + u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; + dev->i2c_client.addr = 0x0a; + for (i = 0; i < 5; i++) + if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2)) + printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n", + dev->name, i); + } + break; } return 0; }