From: Florian Fainelli Date: Mon, 10 Dec 2012 21:21:19 +0000 (+0100) Subject: ARM: ep93xx: properly wait for UART FIFO to be empty X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=210dce5f;p=linux-beck.git ARM: ep93xx: properly wait for UART FIFO to be empty This patch changes the busy-waiting loop around in the decompressor putc() function on the UART FIFO register. Without a proper wait, the output of the decompressor was corrupted like this: Uncompressing Linx. done, booting th enl To highlight the issue more evidently, looping 100 times instead of 1000 makes the issue appear much faster. This patch takes the approach of using an active while loop until the FIFO is empty (not FULL). This issue happened to me on Sim.One running at 200Mhz. Signed-off-by: Florian Fainelli Signed-off-by: Ryan Mallon --- diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 16026c2b1c8c..d64274fc5760 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) - break; - } + /* Transmit fifo not full? */ + while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) + ; __raw_writeb(c, PHYS_UART_DATA); }