From: Laurent Pinchart Date: Thu, 24 Jan 2013 12:16:31 +0000 (+0100) Subject: ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2173441d56e6282f79aaf1f47172e8506f27a25e;p=linux-beck.git ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value The GPIO is already configured as an output, there's no reason to use gpio_direction_output() just to set the output value. Use gpio_set_value() instead. Signed-off-by: Laurent Pinchart Acked-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index efd6a36ef769..f107e82d7e43 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -708,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode) /* video1 (= CON1 camera) expect 24MHz */ clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); clk_enable(mclk); - gpio_direction_output(GPIO_PORT158, 1); + gpio_set_value(GPIO_PORT158, 1); } else { - gpio_direction_output(GPIO_PORT158, 0); + gpio_set_value(GPIO_PORT158, 0); clk_disable(mclk); }