From: Tomasz Figa Date: Thu, 12 Dec 2013 16:07:14 +0000 (+0100) Subject: clk: max77686: Correct callback used for checking clock status X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=21c8ed2dc05bc5477d55000c5e96a4f3e95f408e;p=linux-beck.git clk: max77686: Correct callback used for checking clock status Changing status of clock gates in max77686 requires i2c transfers, which can sleep, so this is done in prepare and unprepare callbacks. Due to this, checking whether whether the clock is ungated must be done in is_prepared() callback as well, for consistency. Signed-off-by: Tomasz Figa Acked-by: Kyungmin Park Signed-off-by: Mike Turquette --- diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index b4a1a9719ab0..9e66115a326b 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -66,7 +66,7 @@ static void max77686_clk_unprepare(struct clk_hw *hw) MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask); } -static int max77686_clk_is_enabled(struct clk_hw *hw) +static int max77686_clk_is_prepared(struct clk_hw *hw) { struct max77686_clk *max77686 = to_max77686_clk(hw); int ret; @@ -84,7 +84,7 @@ static int max77686_clk_is_enabled(struct clk_hw *hw) static struct clk_ops max77686_clk_ops = { .prepare = max77686_clk_prepare, .unprepare = max77686_clk_unprepare, - .is_enabled = max77686_clk_is_enabled, + .is_prepared = max77686_clk_is_prepared, }; static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {