From: Nathan Sullivan Date: Fri, 22 May 2015 14:22:10 +0000 (-0500) Subject: net: macb: Disable half duplex gigabit on Zynq X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=222ca8e0c183309081bdb0fd5827fc2a922be3ad;p=linux-beck.git net: macb: Disable half duplex gigabit on Zynq According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 5f10dfc631d7..fc646a41d548 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev) else phydev->supported &= PHY_BASIC_FEATURES; + if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF) + phydev->supported &= ~SUPPORTED_1000baseT_Half; + phydev->advertising = phydev->supported; bp->link = 0; @@ -2699,6 +2702,14 @@ static const struct macb_config emac_config = { .init = at91ether_init, }; +static const struct macb_config zynq_config = { + .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE | + MACB_CAPS_NO_GIGABIT_HALF, + .dma_burst_length = 16, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,at32ap7000-macb" }, { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, @@ -2709,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, + { .compatible = "cdns,zynq-gem", .data = &zynq_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, macb_dt_ids); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index eb7d76f7bf6a..24b1d9bcd865 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -393,6 +393,7 @@ #define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001 #define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002 #define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004 +#define MACB_CAPS_NO_GIGABIT_HALF 0x00000008 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000