From: Bartosz Markowski Date: Thu, 26 Sep 2013 15:47:16 +0000 (+0200) Subject: ath10k: introduce dynamic pdev parameters X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=226a339ba8f3c53914e640d250feaf4321cfcd04;p=linux-beck.git ath10k: introduce dynamic pdev parameters This is done exactly the same way as for vdev. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 124e7246bb44..d5da8a9f6974 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -120,6 +120,7 @@ struct ath10k_wmi { wait_queue_head_t tx_credits_wq; struct wmi_cmd_map *cmd; struct wmi_vdev_param_map *vdev_param; + struct wmi_pdev_param_map *pdev_param; u32 num_mem_chunks; struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS]; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b5ae01de684e..8684e03b393e 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1882,12 +1882,12 @@ static int ath10k_start(struct ieee80211_hw *hw) else if (ar->state == ATH10K_STATE_RESTARTING) ar->state = ATH10K_STATE_RESTARTED; - ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1); + ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1); if (ret) ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n", ret); - ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0); + ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0); if (ret) ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n", ret); @@ -2209,7 +2209,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, struct ath10k *ar = hw->priv; struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); int ret = 0; - u32 vdev_param; + u32 vdev_param, pdev_param; mutex_lock(&ar->conf_mutex); @@ -2235,8 +2235,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, "vdev %d set beacon tx mode to staggered\n", arvif->vdev_id); - ret = ath10k_wmi_pdev_set_param(ar, - WMI_PDEV_PARAM_BEACON_TX_MODE, + pdev_param = ar->wmi.pdev_param->beacon_tx_mode; + ret = ath10k_wmi_pdev_set_param(ar, pdev_param, WMI_BEACON_STAGGERED_MODE); if (ret) ath10k_warn("Failed to set beacon mode for VDEV: %d\n", diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 89a8cb862c81..3460cf446846 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -383,6 +383,111 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = { WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, }; +static struct wmi_pdev_param_map wmi_pdev_param_map = { + .tx_chain_mask = WMI_PDEV_PARAM_TX_CHAIN_MASK, + .rx_chain_mask = WMI_PDEV_PARAM_RX_CHAIN_MASK, + .txpower_limit2g = WMI_PDEV_PARAM_TXPOWER_LIMIT2G, + .txpower_limit5g = WMI_PDEV_PARAM_TXPOWER_LIMIT5G, + .txpower_scale = WMI_PDEV_PARAM_TXPOWER_SCALE, + .beacon_gen_mode = WMI_PDEV_PARAM_BEACON_GEN_MODE, + .beacon_tx_mode = WMI_PDEV_PARAM_BEACON_TX_MODE, + .resmgr_offchan_mode = WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + .protection_mode = WMI_PDEV_PARAM_PROTECTION_MODE, + .dynamic_bw = WMI_PDEV_PARAM_DYNAMIC_BW, + .non_agg_sw_retry_th = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + .agg_sw_retry_th = WMI_PDEV_PARAM_AGG_SW_RETRY_TH, + .sta_kickout_th = WMI_PDEV_PARAM_STA_KICKOUT_TH, + .ac_aggrsize_scaling = WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, + .ltr_enable = WMI_PDEV_PARAM_LTR_ENABLE, + .ltr_ac_latency_be = WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, + .ltr_ac_latency_bk = WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, + .ltr_ac_latency_vi = WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, + .ltr_ac_latency_vo = WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, + .ltr_ac_latency_timeout = WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + .ltr_sleep_override = WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + .ltr_rx_override = WMI_PDEV_PARAM_LTR_RX_OVERRIDE, + .ltr_tx_activity_timeout = WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + .l1ss_enable = WMI_PDEV_PARAM_L1SS_ENABLE, + .dsleep_enable = WMI_PDEV_PARAM_DSLEEP_ENABLE, + .pcielp_txbuf_flush = WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, + .pcielp_txbuf_watermark = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, + .pdev_stats_update_period = WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + .vdev_stats_update_period = WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + .peer_stats_update_period = WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + .bcnflt_stats_update_period = WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + .pmf_qos = WMI_PDEV_PARAM_PMF_QOS, + .arp_ac_override = WMI_PDEV_PARAM_ARP_AC_OVERRIDE, + .arpdhcp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED, + .dcs = WMI_PDEV_PARAM_DCS, + .ani_enable = WMI_PDEV_PARAM_ANI_ENABLE, + .ani_poll_period = WMI_PDEV_PARAM_ANI_POLL_PERIOD, + .ani_listen_period = WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, + .ani_ofdm_level = WMI_PDEV_PARAM_ANI_OFDM_LEVEL, + .ani_cck_level = WMI_PDEV_PARAM_ANI_CCK_LEVEL, + .dyntxchain = WMI_PDEV_PARAM_DYNTXCHAIN, + .proxy_sta = WMI_PDEV_PARAM_PROXY_STA, + .idle_ps_config = WMI_PDEV_PARAM_IDLE_PS_CONFIG, + .power_gating_sleep = WMI_PDEV_PARAM_POWER_GATING_SLEEP, + .fast_channel_reset = WMI_PDEV_PARAM_UNSUPPORTED, + .burst_dur = WMI_PDEV_PARAM_UNSUPPORTED, + .burst_enable = WMI_PDEV_PARAM_UNSUPPORTED, +}; + +static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { + .tx_chain_mask = WMI_10X_PDEV_PARAM_TX_CHAIN_MASK, + .rx_chain_mask = WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, + .txpower_limit2g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, + .txpower_limit5g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, + .txpower_scale = WMI_10X_PDEV_PARAM_TXPOWER_SCALE, + .beacon_gen_mode = WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, + .beacon_tx_mode = WMI_10X_PDEV_PARAM_BEACON_TX_MODE, + .resmgr_offchan_mode = WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + .protection_mode = WMI_10X_PDEV_PARAM_PROTECTION_MODE, + .dynamic_bw = WMI_10X_PDEV_PARAM_DYNAMIC_BW, + .non_agg_sw_retry_th = WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + .agg_sw_retry_th = WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, + .sta_kickout_th = WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, + .ac_aggrsize_scaling = WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, + .ltr_enable = WMI_10X_PDEV_PARAM_LTR_ENABLE, + .ltr_ac_latency_be = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, + .ltr_ac_latency_bk = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, + .ltr_ac_latency_vi = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, + .ltr_ac_latency_vo = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, + .ltr_ac_latency_timeout = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + .ltr_sleep_override = WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + .ltr_rx_override = WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, + .ltr_tx_activity_timeout = WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + .l1ss_enable = WMI_10X_PDEV_PARAM_L1SS_ENABLE, + .dsleep_enable = WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, + .pcielp_txbuf_flush = WMI_PDEV_PARAM_UNSUPPORTED, + .pcielp_txbuf_watermark = WMI_PDEV_PARAM_UNSUPPORTED, + .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_UNSUPPORTED, + .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_UNSUPPORTED, + .pdev_stats_update_period = WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + .vdev_stats_update_period = WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + .peer_stats_update_period = WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + .bcnflt_stats_update_period = + WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + .pmf_qos = WMI_10X_PDEV_PARAM_PMF_QOS, + .arp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED, + .arpdhcp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, + .dcs = WMI_10X_PDEV_PARAM_DCS, + .ani_enable = WMI_10X_PDEV_PARAM_ANI_ENABLE, + .ani_poll_period = WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, + .ani_listen_period = WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, + .ani_ofdm_level = WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, + .ani_cck_level = WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, + .dyntxchain = WMI_10X_PDEV_PARAM_DYNTXCHAIN, + .proxy_sta = WMI_PDEV_PARAM_UNSUPPORTED, + .idle_ps_config = WMI_PDEV_PARAM_UNSUPPORTED, + .power_gating_sleep = WMI_PDEV_PARAM_UNSUPPORTED, + .fast_channel_reset = WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, + .burst_dur = WMI_10X_PDEV_PARAM_BURST_DUR, + .burst_enable = WMI_10X_PDEV_PARAM_BURST_ENABLE, +}; + int ath10k_wmi_wait_for_service_ready(struct ath10k *ar) { int ret; @@ -1870,10 +1975,12 @@ int ath10k_wmi_attach(struct ath10k *ar) ath10k_warn("Firmware 10.X is not yet supported\n"); ar->wmi.cmd = &wmi_10x_cmd_map; ar->wmi.vdev_param = &wmi_10x_vdev_param_map; + ar->wmi.pdev_param = &wmi_10x_pdev_param_map; ret = -ENOTSUPP; } else { ar->wmi.cmd = &wmi_cmd_map; ar->wmi.vdev_param = &wmi_vdev_param_map; + ar->wmi.pdev_param = &wmi_pdev_param_map; ret = 0; } @@ -2009,12 +2116,16 @@ int ath10k_wmi_pdev_resume_target(struct ath10k *ar) return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_resume_cmdid); } -int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, - u32 value) +int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value) { struct wmi_pdev_set_param_cmd *cmd; struct sk_buff *skb; + if (id == WMI_PDEV_PARAM_UNSUPPORTED) { + ath10k_warn("pdev param %d not supported by firmware\n", id); + return -EINVAL; + } + skb = ath10k_wmi_alloc_skb(sizeof(*cmd)); if (!skb) return -ENOMEM; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 15185867f6e1..80ab2f0fbe50 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2072,6 +2072,60 @@ struct wmi_csa_event { #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 +struct wmi_pdev_param_map { + u32 tx_chain_mask; + u32 rx_chain_mask; + u32 txpower_limit2g; + u32 txpower_limit5g; + u32 txpower_scale; + u32 beacon_gen_mode; + u32 beacon_tx_mode; + u32 resmgr_offchan_mode; + u32 protection_mode; + u32 dynamic_bw; + u32 non_agg_sw_retry_th; + u32 agg_sw_retry_th; + u32 sta_kickout_th; + u32 ac_aggrsize_scaling; + u32 ltr_enable; + u32 ltr_ac_latency_be; + u32 ltr_ac_latency_bk; + u32 ltr_ac_latency_vi; + u32 ltr_ac_latency_vo; + u32 ltr_ac_latency_timeout; + u32 ltr_sleep_override; + u32 ltr_rx_override; + u32 ltr_tx_activity_timeout; + u32 l1ss_enable; + u32 dsleep_enable; + u32 pcielp_txbuf_flush; + u32 pcielp_txbuf_watermark; + u32 pcielp_txbuf_tmo_en; + u32 pcielp_txbuf_tmo_value; + u32 pdev_stats_update_period; + u32 vdev_stats_update_period; + u32 peer_stats_update_period; + u32 bcnflt_stats_update_period; + u32 pmf_qos; + u32 arp_ac_override; + u32 arpdhcp_ac_override; + u32 dcs; + u32 ani_enable; + u32 ani_poll_period; + u32 ani_listen_period; + u32 ani_ofdm_level; + u32 ani_cck_level; + u32 dyntxchain; + u32 proxy_sta; + u32 idle_ps_config; + u32 power_gating_sleep; + u32 fast_channel_reset; + u32 burst_dur; + u32 burst_enable; +}; + +#define WMI_PDEV_PARAM_UNSUPPORTED 0 + enum wmi_pdev_param { /* TX chian mask */ WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, @@ -2171,6 +2225,97 @@ enum wmi_pdev_param { WMI_PDEV_PARAM_POWER_GATING_SLEEP, }; +enum wmi_10x_pdev_param { + /* TX chian mask */ + WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + /* RX chian mask */ + WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, + /* TX power limit for 2G Radio */ + WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, + /* TX power limit for 5G Radio */ + WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, + /* TX power scale */ + WMI_10X_PDEV_PARAM_TXPOWER_SCALE, + /* Beacon generation mode . 0: host, 1: target */ + WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, + /* Beacon generation mode . 0: staggered 1: bursted */ + WMI_10X_PDEV_PARAM_BEACON_TX_MODE, + /* + * Resource manager off chan mode . + * 0: turn off off chan mode. 1: turn on offchan mode + */ + WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + /* + * Protection mode: + * 0: no protection 1:use CTS-to-self 2: use RTS/CTS + */ + WMI_10X_PDEV_PARAM_PROTECTION_MODE, + /* Dynamic bandwidth 0: disable 1: enable */ + WMI_10X_PDEV_PARAM_DYNAMIC_BW, + /* Non aggregrate/ 11g sw retry threshold.0-disable */ + WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + /* aggregrate sw retry threshold. 0-disable*/ + WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, + /* Station kickout threshold (non of consecutive failures).0-disable */ + WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, + /* Aggerate size scaling configuration per AC */ + WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, + /* LTR enable */ + WMI_10X_PDEV_PARAM_LTR_ENABLE, + /* LTR latency for BE, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, + /* LTR latency for BK, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, + /* LTR latency for VI, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, + /* LTR latency for VO, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, + /* LTR AC latency timeout, in ms */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + /* LTR platform latency override, in us */ + WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + /* LTR-RX override, in us */ + WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, + /* Tx activity timeout for LTR, in us */ + WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + /* L1SS state machine enable */ + WMI_10X_PDEV_PARAM_L1SS_ENABLE, + /* Deep sleep state machine enable */ + WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, + /* pdev level stats update period in ms */ + WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + /* vdev level stats update period in ms */ + WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + /* peer level stats update period in ms */ + WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + /* beacon filter status update period */ + WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ + WMI_10X_PDEV_PARAM_PMF_QOS, + /* Access category on which ARP and DHCP frames are sent */ + WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, + /* DCS configuration */ + WMI_10X_PDEV_PARAM_DCS, + /* Enable/Disable ANI on target */ + WMI_10X_PDEV_PARAM_ANI_ENABLE, + /* configure the ANI polling period */ + WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, + /* configure the ANI listening period */ + WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, + /* configure OFDM immunity level */ + WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, + /* configure CCK immunity level */ + WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, + /* Enable/Disable CDD for 1x1 STAs in rate control module */ + WMI_10X_PDEV_PARAM_DYNTXCHAIN, + /* Enable/Disable Fast channel reset*/ + WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, + /* Set Bursting DUR */ + WMI_10X_PDEV_PARAM_BURST_DUR, + /* Set Bursting Enable*/ + WMI_10X_PDEV_PARAM_BURST_ENABLE, +}; + struct wmi_pdev_set_param_cmd { __le32 param_id; __le32 param_value; @@ -3797,8 +3942,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar); int ath10k_wmi_pdev_resume_target(struct ath10k *ar); int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, u16 rd5g, u16 ctl2g, u16 ctl5g); -int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, - u32 value); +int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value); int ath10k_wmi_cmd_init(struct ath10k *ar); int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *); void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);