From: Shawn Guo <shawn.guo@freescale.com>
Date: Mon, 15 Jul 2013 08:31:53 +0000 (+0800)
Subject: ENGR00269945: pinctrl: support pinctrl setting assertion via gpios
X-Git-Tag: KARO-TX6-2014-07-10~375
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=22988d4a843099dadea3a2317d82b464ad51a28e;p=karo-tx-linux.git

ENGR00269945: pinctrl: support pinctrl setting assertion via gpios

It's pretty common that on some reference design or validation boards,
one pin could be used by two devices on board, and the pin route is
controlled by a GPIO.  So to assert the pin for given device, not only
the pinmux controller in SoC needs to be set up properly but also the
GPIO needs to be pulled up/down.

The patch adds support of a device tree property "pinctrl-assert-gpios"
under client device node.  It plays pretty much like a board level pin
multiplexer, and steers the pin route by controlling the GPIOs.  When
client device has the property represent in its node, pinctrl device
tree mapping function will firstly pull up/down the GPIOs to assert the
pins for the device at board level.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index fa40a177164c..70028f6c7138 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -71,6 +71,13 @@ pinctrl-names:	The list of names to assign states. List entry 0 defines the
 		name for integer state ID 0, list entry 1 for state ID 1, and
 		so on.
 
+pinctrl-assert-gpios:
+		List of phandles, each pointing at a GPIO which is used by some
+		board design to steer pins between two peripherals on the board.
+		It plays like a board level pin multiplexer to choose different
+		functions for given pins by pulling up/down the GPIOs.  See
+		bindings/gpio/gpio.txt for details of how to specify GPIO.
+
 For example:
 
 	/* For a client device requiring named states */
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index eda13de2e7c0..02b11f7d11db 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -18,6 +18,7 @@
 
 #include <linux/device.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/slab.h>
 
@@ -172,6 +173,43 @@ static int dt_remember_dummy_state(struct pinctrl *p, const char *statename)
 	return dt_remember_or_free_map(p, statename, NULL, map, 1);
 }
 
+static int dt_gpio_assert_pinctrl(struct pinctrl *p)
+{
+	struct device_node *np = p->dev->of_node;
+	enum of_gpio_flags flags;
+	int gpio;
+	int index = 0;
+	int ret;
+
+	if (!of_find_property(np, "pinctrl-assert-gpios", NULL))
+		return 0; /* Missing the property, so nothing to be done */
+
+	for (;; index++) {
+		gpio = of_get_named_gpio_flags(np, "pinctrl-assert-gpios",
+					       index, &flags);
+		if (gpio < 0)
+			break; /* End of the phandle list */
+
+		if (!gpio_is_valid(gpio))
+			return -EINVAL;
+
+		ret = devm_gpio_request_one(p->dev, gpio, GPIOF_OUT_INIT_LOW,
+					    NULL);
+		if (ret < 0)
+			return ret;
+
+		if (flags & OF_GPIO_ACTIVE_LOW)
+			continue;
+
+		if (gpio_cansleep(gpio))
+			gpio_set_value_cansleep(gpio, 1);
+		else
+			gpio_set_value(gpio, 1);
+	}
+
+	return 0;
+}
+
 int pinctrl_dt_to_map(struct pinctrl *p)
 {
 	struct device_node *np = p->dev->of_node;
@@ -192,6 +230,12 @@ int pinctrl_dt_to_map(struct pinctrl *p)
 		return 0;
 	}
 
+	ret = dt_gpio_assert_pinctrl(p);
+	if (ret) {
+		dev_dbg(p->dev, "failed to assert pinctrl setting: %d\n", ret);
+		return ret;
+	}
+
 	/* We may store pointers to property names within the node */
 	of_node_get(np);