From: Jayachandran C Date: Thu, 4 Aug 2011 19:58:22 +0000 (+0530) Subject: usb: OHCI/EHCI support for Netlogic XLS processor. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=23106343db66171c94ae486d2035478ec575b228;p=linux-beck.git usb: OHCI/EHCI support for Netlogic XLS processor. Add supprt for on-chip USB controller for Netlogic XLS MIPS64 SoC processor family. Changes are: - update ehci-hcd.c and ohci-hcd.c to add XLS hcds - add ehci-xls.c: EHCI support for Netlogic XLS. - add ohci-xls.c: OHCI support for Netlogic XLS. Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 750f60fe6a9f..2af3e2a89efc 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1296,6 +1296,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_pxa168_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ehci-xls.c" +#define PLATFORM_DRIVER ehci_xls_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c new file mode 100644 index 000000000000..fe74bd676018 --- /dev/null +++ b/drivers/usb/host/ehci-xls.c @@ -0,0 +1,161 @@ +/* + * EHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include + +static int ehci_xls_setup(struct usb_hcd *hcd) +{ + int retval; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci_reset(ehci); + + return retval; +} + +int ehci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto err2; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), + retval); + return retval; +} + +static struct hc_driver ehci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_USB2 | HCD_MEMORY, + .reset = ehci_xls_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_xls_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev); +} + +static int ehci_xls_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +MODULE_ALIAS("ehci-xls"); + +static struct platform_driver ehci_xls_driver = { + .probe = ehci_xls_probe, + .remove = ehci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ehci-xls", + }, +}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index f9cf3f04b742..34efd479e068 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_ath79_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ohci-xls.c" +#define PLATFORM_DRIVER ohci_xls_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c new file mode 100644 index 000000000000..a3a9c6f45b91 --- /dev/null +++ b/drivers/usb/host/ohci-xls.c @@ -0,0 +1,151 @@ +/* + * OHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on ohci-au1xxx.c, and other Linux OHCI drivers. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include + +static int ohci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *dev) +{ + struct resource *res; + struct usb_hcd *hcd; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "Found HC with no IRQ\n"); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "MMIO Handle incorrect!\n"); + return -ENODEV; + } + + hcd = usb_create_hcd(driver, &dev->dev, "XLS"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&dev->dev, "Controller already in use\n"); + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&dev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&dev->dev, "init fail, %d\n", retval); + return retval; +} + +static int ohci_xls_reset(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} + +static int __devinit ohci_xls_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci; + int ret; + + ohci = hcd_to_ohci(hcd); + ret = ohci_run(ohci); + if (ret < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static struct hc_driver ohci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + .reset = ohci_xls_reset, + .start = ohci_xls_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_xls_probe(struct platform_device *dev) +{ + int ret; + + pr_debug("In ohci_xls_probe"); + if (usb_disabled()) + return -ENODEV; + ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev); + return ret; +} + +static int ohci_xls_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +static struct platform_driver ohci_xls_driver = { + .probe = ohci_xls_probe, + .remove = ohci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ohci-xls-0", + .owner = THIS_MODULE, + }, +};