From: Stephen Warren <swarren@wwwdotorg.org>
Date: Tue, 1 Jan 2013 06:26:45 +0000 (-0700)
Subject: ARM: bcm2835: add I2C controllers to DT
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=232fed4825e832c89b1d47a24c7836918063fb3e;p=linux-beck.git

ARM: bcm2835: add I2C controllers to DT

The BCM2835 has 3 identical I2C controllers. Instantiate them all in the
SoC .dtsi file, and enable the relevant two in the Raspberry Pi board
.dts file.

Note that on the Raspberry Pi Model B revision 1, I2C0 is connected to
the general-purpose expansion header, and I2C1 is connected to the camera
connector. Revision 2 of the board swaps these assignments:-(

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
---

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 0544ef860623..aafda174a605 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -25,6 +25,16 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
 &sdhci {
 	status = "okay";
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1d7e4f5c0b1e..c69a591631b8 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -64,6 +64,22 @@
 			#interrupt-cells = <2>;
 		};
 
+		i2c0: i2c@20205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
 		sdhci: sdhci {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
@@ -73,6 +89,12 @@
 		};
 	};
 
+	clk_i2c: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <150000000>;
+	};
+
 	clk_mmc: clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;