From: Jiri Kosina Date: Thu, 19 May 2011 15:58:07 +0000 (+0200) Subject: HID: magicmouse: ignore 'ivalid report id' while switching modes X-Git-Tag: v3.0-rc1~345^2^4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=23746a6;p=karo-tx-linux.git HID: magicmouse: ignore 'ivalid report id' while switching modes The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022 Tested-by: Chase Douglas Signed-off-by: Jiri Kosina --- diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 318cc40df92d..82f0c3d741f2 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -499,9 +499,17 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; + /* + * The device reponds with 'invalid report id' when feature + * report switching it into multitouch mode is sent to it. + * + * This results in -EIO from the _raw low-level transport callback, + * but there seems to be no other way of switching the mode. + * Thus the super-ugly hacky success check below. + */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != sizeof(feature)) { + if (ret != -EIO) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; }