From: Vladimir Zapolskiy Date: Mon, 19 Sep 2016 01:37:31 +0000 (+0300) Subject: ARM: imx legacy: pca100: move peripheral initialization to .init_late X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=23fe1fd01c1e065907fdcd5cbfd35c02e5a418a2;p=linux-beck.git ARM: imx legacy: pca100: move peripheral initialization to .init_late The change moves some of peripheral registrations and initializations (all peripherals dependent on GPIOs) from .init_machine to .init_late level, this allows to safely shift the shared GPIO controller driver initialization level after init level of i.MX IOMUXC driver. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Shawn Guo --- diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 2d1c50bd8bdf..ed675863655b 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -362,12 +362,8 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - imx27_add_imx_ssi(0, &pca100_ssi_pdata); - imx27_add_imx_uart0(&uart_pdata); - imx27_add_mxc_mmc(1, &sdhc_pdata); - imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ @@ -382,6 +378,19 @@ static void __init pca100_init(void) ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); + imx27_add_imx_fb(&pca100_fb_data); + + imx27_add_fec(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); +} + +static void __init pca100_late_init(void) +{ + imx27_add_imx_ssi(0, &pca100_ssi_pdata); + + imx27_add_mxc_mmc(1, &sdhc_pdata); + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); @@ -403,12 +412,6 @@ static void __init pca100_init(void) if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_imx_fb(&pca100_fb_data); - - imx27_add_fec(NULL); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) @@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .init_machine = pca100_init, + .init_machine = pca100_init, + .init_late = pca100_late_init, .init_time = pca100_timer_init, .restart = mxc_restart, MACHINE_END