From: Hante Meuleman Date: Wed, 17 Feb 2016 10:27:10 +0000 (+0100) Subject: brcmfmac: add 802.11w management frame protection support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=240d61a9ddeb8a77f11369f67f6ef060354b909d;p=linux-beck.git brcmfmac: add 802.11w management frame protection support Add full support for both AP and STA for management frame protection. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 5203d8f38474..d5c2a27573b4 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -72,8 +72,13 @@ #define RSN_AKM_NONE 0 /* None (IBSS) */ #define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */ #define RSN_AKM_PSK 2 /* Pre-shared Key */ +#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */ +#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */ #define RSN_CAP_LEN 2 /* Length of RSN capabilities */ -#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C +#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3)) +#define RSN_CAP_MFPR_MASK BIT(6) +#define RSN_CAP_MFPC_MASK BIT(7) +#define RSN_PMKID_COUNT_LEN 2 #define VNDR_IE_CMD_LEN 4 /* length of the set command * string :"add", "del" (+ NUL) @@ -211,12 +216,19 @@ static const struct ieee80211_regdomain brcmf_regdom = { REG_RULE(5470-10, 5850+10, 80, 6, 20, 0), } }; -static const u32 __wl_cipher_suites[] = { +/* Note: brcmf_cipher_suites is an array of int defining which cipher suites + * are supported. A pointer to this array and the number of entries is passed + * on to upper layers. AES_CMAC defines whether or not the driver supports MFP. + * So the cipher suite AES_CMAC has to be the last one in the array, and when + * device does not support MFP then the number of suites will be decreased by 1 + */ +static const u32 brcmf_cipher_suites[] = { WLAN_CIPHER_SUITE_WEP40, WLAN_CIPHER_SUITE_WEP104, WLAN_CIPHER_SUITE_TKIP, WLAN_CIPHER_SUITE_CCMP, - WLAN_CIPHER_SUITE_AES_CMAC, + /* Keep as last entry: */ + WLAN_CIPHER_SUITE_AES_CMAC }; /* Vendor specific ie. id = 221, oui and type defines exact ie */ @@ -1533,7 +1545,7 @@ static s32 brcmf_set_auth_type(struct net_device *ndev, static s32 brcmf_set_wsec_mode(struct net_device *ndev, - struct cfg80211_connect_params *sme, bool mfp) + struct cfg80211_connect_params *sme) { struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); struct brcmf_cfg80211_security *sec; @@ -1592,10 +1604,7 @@ brcmf_set_wsec_mode(struct net_device *ndev, sme->privacy) pval = AES_ENABLED; - if (mfp) - wsec = pval | gval | MFP_CAPABLE; - else - wsec = pval | gval; + wsec = pval | gval; err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec); if (err) { brcmf_err("error (%d)\n", err); @@ -1612,56 +1621,100 @@ brcmf_set_wsec_mode(struct net_device *ndev, static s32 brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) { - struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); - struct brcmf_cfg80211_security *sec; - s32 val = 0; - s32 err = 0; + struct brcmf_if *ifp = netdev_priv(ndev); + s32 val; + s32 err; + const struct brcmf_tlv *rsn_ie; + const u8 *ie; + u32 ie_len; + u32 offset; + u16 rsn_cap; + u32 mfp; + u16 count; - if (sme->crypto.n_akm_suites) { - err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), - "wpa_auth", &val); - if (err) { - brcmf_err("could not get wpa_auth (%d)\n", err); - return err; + if (!sme->crypto.n_akm_suites) + return 0; + + err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val); + if (err) { + brcmf_err("could not get wpa_auth (%d)\n", err); + return err; + } + if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) { + switch (sme->crypto.akm_suites[0]) { + case WLAN_AKM_SUITE_8021X: + val = WPA_AUTH_UNSPECIFIED; + break; + case WLAN_AKM_SUITE_PSK: + val = WPA_AUTH_PSK; + break; + default: + brcmf_err("invalid cipher group (%d)\n", + sme->crypto.cipher_group); + return -EINVAL; } - if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) { - switch (sme->crypto.akm_suites[0]) { - case WLAN_AKM_SUITE_8021X: - val = WPA_AUTH_UNSPECIFIED; - break; - case WLAN_AKM_SUITE_PSK: - val = WPA_AUTH_PSK; - break; - default: - brcmf_err("invalid cipher group (%d)\n", - sme->crypto.cipher_group); - return -EINVAL; - } - } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) { - switch (sme->crypto.akm_suites[0]) { - case WLAN_AKM_SUITE_8021X: - val = WPA2_AUTH_UNSPECIFIED; - break; - case WLAN_AKM_SUITE_PSK: - val = WPA2_AUTH_PSK; - break; - default: - brcmf_err("invalid cipher group (%d)\n", - sme->crypto.cipher_group); - return -EINVAL; - } + } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) { + switch (sme->crypto.akm_suites[0]) { + case WLAN_AKM_SUITE_8021X: + val = WPA2_AUTH_UNSPECIFIED; + break; + case WLAN_AKM_SUITE_8021X_SHA256: + val = WPA2_AUTH_1X_SHA256; + break; + case WLAN_AKM_SUITE_PSK_SHA256: + val = WPA2_AUTH_PSK_SHA256; + break; + case WLAN_AKM_SUITE_PSK: + val = WPA2_AUTH_PSK; + break; + default: + brcmf_err("invalid cipher group (%d)\n", + sme->crypto.cipher_group); + return -EINVAL; } + } - brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); - err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), - "wpa_auth", val); - if (err) { - brcmf_err("could not set wpa_auth (%d)\n", err); - return err; - } + if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) + goto skip_mfp_config; + /* The MFP mode (1 or 2) needs to be determined, parse IEs. The + * IE will not be verified, just a quick search for MFP config + */ + rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len, + WLAN_EID_RSN); + if (!rsn_ie) + goto skip_mfp_config; + ie = (const u8 *)rsn_ie; + ie_len = rsn_ie->len + TLV_HDR_LEN; + /* Skip unicast suite */ + offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN; + if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) + goto skip_mfp_config; + /* Skip multicast suite */ + count = ie[offset] + (ie[offset + 1] << 8); + offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); + if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) + goto skip_mfp_config; + /* Skip auth key management suite(s) */ + count = ie[offset] + (ie[offset + 1] << 8); + offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); + if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len) + goto skip_mfp_config; + /* Ready to read capabilities */ + mfp = BRCMF_MFP_NONE; + rsn_cap = ie[offset] + (ie[offset + 1] << 8); + if (rsn_cap & RSN_CAP_MFPR_MASK) + mfp = BRCMF_MFP_REQUIRED; + else if (rsn_cap & RSN_CAP_MFPC_MASK) + mfp = BRCMF_MFP_CAPABLE; + brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp); + +skip_mfp_config: + brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val); + if (err) { + brcmf_err("could not set wpa_auth (%d)\n", err); + return err; } - sec = &profile->sec; - sec->wpa_auth = sme->crypto.akm_suites[0]; return err; } @@ -1827,7 +1880,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } - err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED); + err = brcmf_set_wsec_mode(ndev, sme); if (err) { brcmf_err("wl_set_set_cipher failed (%d)\n", err); goto done; @@ -2077,10 +2130,12 @@ brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx, bool pairwise, const u8 *mac_addr) { struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_wsec_key key; - s32 err = 0; + struct brcmf_wsec_key *key; + s32 err; brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CONN, "key index (%d)\n", key_idx); + if (!check_vif_up(ifp->vif)) return -EIO; @@ -2089,16 +2144,19 @@ brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, return -EINVAL; } - memset(&key, 0, sizeof(key)); + key = &ifp->vif->profile.key[key_idx]; - key.index = (u32)key_idx; - key.flags = BRCMF_PRIMARY_KEY; - key.algo = CRYPTO_ALGO_OFF; + if (key->algo == CRYPTO_ALGO_OFF) { + brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n"); + return -EINVAL; + } - brcmf_dbg(CONN, "key index (%d)\n", key_idx); + memset(key, 0, sizeof(*key)); + key->index = (u32)key_idx; + key->flags = BRCMF_PRIMARY_KEY; - /* Set the new key/index */ - err = send_key_to_dongle(ifp, &key); + /* Clear the key/index */ + err = send_key_to_dongle(ifp, key); brcmf_dbg(TRACE, "Exit\n"); return err; @@ -2106,8 +2164,8 @@ brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, static s32 brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_idx, bool pairwise, const u8 *mac_addr, - struct key_params *params) + u8 key_idx, bool pairwise, const u8 *mac_addr, + struct key_params *params) { struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_wsec_key *key; @@ -2214,9 +2272,10 @@ done: } static s32 -brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie, - void (*callback) (void *cookie, struct key_params * params)) +brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx, + bool pairwise, const u8 *mac_addr, void *cookie, + void (*callback)(void *cookie, + struct key_params *params)) { struct key_params params; struct brcmf_if *ifp = netdev_priv(ndev); @@ -2268,8 +2327,15 @@ done: static s32 brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy, - struct net_device *ndev, u8 key_idx) + struct net_device *ndev, u8 key_idx) { + struct brcmf_if *ifp = netdev_priv(ndev); + + brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx); + + if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) + return 0; + brcmf_dbg(INFO, "Not supported\n"); return -EOPNOTSUPP; @@ -3769,7 +3835,7 @@ brcmf_configure_wpaie(struct brcmf_if *ifp, u32 auth = 0; /* d11 open authentication */ u16 count; s32 err = 0; - s32 len = 0; + s32 len; u32 i; u32 wsec; u32 pval = 0; @@ -3779,6 +3845,7 @@ brcmf_configure_wpaie(struct brcmf_if *ifp, u8 *data; u16 rsn_cap; u32 wme_bss_disable; + u32 mfp; brcmf_dbg(TRACE, "Enter\n"); if (wpa_ie == NULL) @@ -3893,19 +3960,53 @@ brcmf_configure_wpaie(struct brcmf_if *ifp, is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) : (wpa_auth |= WPA_AUTH_PSK); break; + case RSN_AKM_SHA256_PSK: + brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n"); + wpa_auth |= WPA2_AUTH_PSK_SHA256; + break; + case RSN_AKM_SHA256_1X: + brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n"); + wpa_auth |= WPA2_AUTH_1X_SHA256; + break; default: brcmf_err("Ivalid key mgmt info\n"); } offset++; } + mfp = BRCMF_MFP_NONE; if (is_rsn_ie) { wme_bss_disable = 1; if ((offset + RSN_CAP_LEN) <= len) { rsn_cap = data[offset] + (data[offset + 1] << 8); if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK) wme_bss_disable = 0; + if (rsn_cap & RSN_CAP_MFPR_MASK) { + brcmf_dbg(TRACE, "MFP Required\n"); + mfp = BRCMF_MFP_REQUIRED; + /* Firmware only supports mfp required in + * combination with WPA2_AUTH_PSK_SHA256 or + * WPA2_AUTH_1X_SHA256. + */ + if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 | + WPA2_AUTH_1X_SHA256))) { + err = -EINVAL; + goto exit; + } + /* Firmware has requirement that WPA2_AUTH_PSK/ + * WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI + * is to be included in the rsn ie. + */ + if (wpa_auth & WPA2_AUTH_PSK_SHA256) + wpa_auth |= WPA2_AUTH_PSK; + else if (wpa_auth & WPA2_AUTH_1X_SHA256) + wpa_auth |= WPA2_AUTH_UNSPECIFIED; + } else if (rsn_cap & RSN_CAP_MFPC_MASK) { + brcmf_dbg(TRACE, "MFP Capable\n"); + mfp = BRCMF_MFP_CAPABLE; + } } + offset += RSN_CAP_LEN; /* set wme_bss_disable to sync RSN Capabilities */ err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable", wme_bss_disable); @@ -3913,6 +4014,21 @@ brcmf_configure_wpaie(struct brcmf_if *ifp, brcmf_err("wme_bss_disable error %d\n", err); goto exit; } + + /* Skip PMKID cnt as it is know to be 0 for AP. */ + offset += RSN_PMKID_COUNT_LEN; + + /* See if there is BIP wpa suite left for MFP */ + if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) && + ((offset + WPA_IE_MIN_OUI_LEN) <= len)) { + err = brcmf_fil_bsscfg_data_set(ifp, "bip", + &data[offset], + WPA_IE_MIN_OUI_LEN); + if (err < 0) { + brcmf_err("bip error %d\n", err); + goto exit; + } + } } /* FOR WPS , set SES_OW_ENABLED */ wsec = (pval | gval | SES_OW_ENABLED); @@ -3929,6 +4045,16 @@ brcmf_configure_wpaie(struct brcmf_if *ifp, brcmf_err("wsec error %d\n", err); goto exit; } + /* Configure MFP, this needs to go after wsec otherwise the wsec command + * will overwrite the values set by MFP + */ + if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) { + err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp); + if (err < 0) { + brcmf_err("mfp error %d\n", err); + goto exit; + } + } /* set upper-layer auth */ err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth); if (err < 0) { @@ -6149,8 +6275,10 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) wiphy->n_addresses = i; wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - wiphy->cipher_suites = __wl_cipher_suites; - wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); + wiphy->cipher_suites = brcmf_cipher_suites; + wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites); + if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) + wiphy->n_cipher_suites--; wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | WIPHY_FLAG_OFFCHAN_TX | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index e4c1d4364684..95e35bcc16ce 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -72,7 +72,7 @@ #define BRCMF_VNDR_IE_P2PAF_SHIFT 12 -#define BRCMF_MAX_DEFAULT_KEYS 4 +#define BRCMF_MAX_DEFAULT_KEYS 6 /* beacon loss timeout defaults */ #define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2 @@ -107,7 +107,6 @@ struct brcmf_cfg80211_security { u32 auth_type; u32 cipher_pairwise; u32 cipher_group; - u32 wpa_auth; }; /** diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c index bfa19bb632b7..62985f2c0853 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c @@ -161,6 +161,7 @@ void brcmf_feat_attach(struct brcmf_pub *drvr) ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS); brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode"); brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable"); + brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp"); pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER; err = brcmf_fil_iovar_data_get(ifp, "pfn_macaddr", &pfn_mac, diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h index a3efa35a5c21..db4733a95e28 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h @@ -30,6 +30,7 @@ * WOWL_ND: WOWL net detect (PNO) * WOWL_GTK: (WOWL) GTK rekeying offload * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL. + * MFP: 802.11w Management Frame Protection. */ #define BRCMF_FEAT_LIST \ BRCMF_FEAT_DEF(MBSS) \ @@ -42,7 +43,8 @@ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \ BRCMF_FEAT_DEF(WOWL_ND) \ BRCMF_FEAT_DEF(WOWL_GTK) \ - BRCMF_FEAT_DEF(WOWL_ARP_ND) + BRCMF_FEAT_DEF(WOWL_ARP_ND) \ + BRCMF_FEAT_DEF(MFP) /* * Quirks: diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h index 6d41ae392a8f..a4118c0ef6ca 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h @@ -142,6 +142,10 @@ #define BRCMF_RSN_KEK_LENGTH 16 #define BRCMF_RSN_REPLAY_LEN 8 +#define BRCMF_MFP_NONE 0 +#define BRCMF_MFP_CAPABLE 1 +#define BRCMF_MFP_REQUIRED 2 + /* join preference types for join_pref iovar */ enum brcmf_join_pref_types { BRCMF_JOIN_PREF_RSSI = 1, diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h index 3f68dd5ecd11..7b9a77981df1 100644 --- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h +++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h @@ -236,6 +236,8 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec) #define WPA2_AUTH_RESERVED3 0x0200 #define WPA2_AUTH_RESERVED4 0x0400 #define WPA2_AUTH_RESERVED5 0x0800 +#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */ +#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */ #define DOT11_DEFAULT_RTS_LEN 2347 #define DOT11_DEFAULT_FRAG_LEN 2346