From: Ioana Ciornei Date: Wed, 14 Oct 2015 18:14:18 +0000 (+0300) Subject: staging: iio: adc: remove multiple blank lines X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=253ed6848f07b910be5a9bbe1a741c6bc679cb54;p=linux-beck.git staging: iio: adc: remove multiple blank lines Remove multiple blank lines since there is no practical reason to have it Signed-off-by: Ioana Ciornei Reviewed-by: Daniel Baluta Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index e7212c8dff04..f3d793cc3f08 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -88,7 +88,6 @@ #define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available * at the MCLK2 pin */ - /* Configuration Register Bit Designations (AD7192_REG_CONF) */ #define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c index 273703399282..d37e8a436986 100644 --- a/drivers/staging/iio/adc/ad7280a.c +++ b/drivers/staging/iio/adc/ad7280a.c @@ -769,7 +769,6 @@ static IIO_DEVICE_ATTR(in_temp_thresh_high_value, ad7280_write_channel_config, AD7280A_AUX_ADC_OVERVOLTAGE); - static struct attribute *ad7280_event_attributes[] = { &iio_dev_attr_in_thresh_low_value.dev_attr.attr, &iio_dev_attr_in_thresh_high_value.dev_attr.attr, diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index 722bb1524d65..618b41faa289 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -206,7 +206,6 @@ static int ad7780_probe(struct spi_device *spi) indio_dev->info = &ad7780_info; if (pdata && gpio_is_valid(pdata->gpio_pdrst)) { - ret = devm_gpio_request_one(&spi->dev, pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW, diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 663608762b6b..b3dec7060d40 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -38,7 +38,6 @@ #define AD7816_TEMP_FLOAT_OFFSET 2 #define AD7816_TEMP_FLOAT_MASK 0x3 - /* * struct ad7816_chip_info - chip specific information */ @@ -70,7 +69,6 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data) } gpio_set_value(chip->rdwr_pin, 1); - if (chip->mode == AD7816_PD) { /* operating mode 2 */ gpio_set_value(chip->convert_pin, 1); gpio_set_value(chip->convert_pin, 0); @@ -203,7 +201,6 @@ static IIO_DEVICE_ATTR(channel, S_IRUGO | S_IWUSR, ad7816_store_channel, 0); - static ssize_t ad7816_show_value(struct device *dev, struct device_attribute *attr, char *buf)