From: Bartlomiej Zolnierkiewicz Date: Sat, 13 Oct 2007 15:47:50 +0000 (+0200) Subject: ide-pmac: use ide_tune_dma() (take 2) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=254bb5503611da57240ed6df1cfe6d7f0f185027;p=linux-beck.git ide-pmac: use ide_tune_dma() (take 2) * Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma(). * Use ide_tune_dma() in pmac_ide_dma_check(). While at it: * Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA). * Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0"). v2: * No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy). Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 24f73291c4d5..a1d24cd1293e 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1593,24 +1593,10 @@ pmac_ide_destroy_dmatable (ide_drive_t *drive) static int pmac_ide_dma_check(ide_drive_t *drive) { - int enable = 1; + if (ide_tune_dma(drive)) + return 0; - drive->using_dma = 0; - - if (drive->media == ide_floppy) - enable = 0; - if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive)) - enable = 0; - if (__ide_dma_bad_drive(drive)) - enable = 0; - - if (enable) { - u8 mode = ide_max_dma_mode(drive); - - if (mode && pmac_ide_tune_chipset(drive, mode) == 0) - drive->using_dma = 1; - } - return 0; + return -1; } /* @@ -1844,7 +1830,10 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->mwdma_mask = 0x07; hwif->swdma_mask = 0x00; break; - } + } + + hwif->autodma = 1; + hwif->drives[1].autodma = hwif->drives[0].autodma = hwif->autodma; } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */