From: Dongwon Kim Date: Thu, 17 Mar 2016 01:06:13 +0000 (-0700) Subject: drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=25a56705332add0363e47b3a0eca001d6fbd5bec;p=linux-beck.git drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit For BXT, description of polarities of PORT_PLL_REF_SEL has been reversed for newer Gen9LP steppings according to the recent update in Bspec. This bit now should be set for "Non-SSC" mode for all Gen9LP starting from B0 stepping. v2: Only B0 and newer stepping should be affected by this change. Signed-off-by: Dongwon Kim Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94866 Reviewed-by: Imre Deak Signed-off-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/1458176773-26925-1-git-send-email-dongwon.kim@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 19efdd3318b6..0bde6a4259fd 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1296,7 +1296,15 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); - temp &= ~PORT_PLL_REF_SEL; + /* + * Definition of each bit polarity has been changed + * after A1 stepping + */ + if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1)) + temp &= ~PORT_PLL_REF_SEL; + else + temp |= PORT_PLL_REF_SEL; + /* Non-SSC reference */ I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);