From: Mauro Carvalho Chehab Date: Tue, 18 Oct 2016 19:44:25 +0000 (-0200) Subject: [media] rc: don't break long lines X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=25ec587c02c3008ead4046a998eb412ce41c72ec;p=linux-beck.git [media] rc: don't break long lines Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index 9f5b59706741..0884b7dc0e71 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -527,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb) remote_num = (data[3] >> 4) & 0x0f; if (channel_mask & (1 << (remote_num + 1))) { dbginfo(&ati_remote->interface->dev, - "Masked input from channel 0x%02x: data %02x, " - "mask= 0x%02lx\n", + "Masked input from channel 0x%02x: data %02x, mask= 0x%02lx\n", remote_num, data[2], channel_mask); return; } diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index d1c61cd035f6..bd5512e64aea 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -1210,8 +1210,7 @@ MODULE_PARM_DESC(txsim, MODULE_DEVICE_TABLE(pnp, ene_ids); MODULE_DESCRIPTION - ("Infrared input driver for KB3926B/C/D/E/F " - "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); + ("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); MODULE_AUTHOR("Maxim Levitsky"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index d62b1f38292c..bd807fa4cb9f 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -441,13 +441,11 @@ MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)"); /* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */ static int display_type; module_param(display_type, int, S_IRUGO); -MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, " - "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); +MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, 1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); static int pad_stabilize = 1; module_param(pad_stabilize, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " - "presses in arrow key mode. 0=disable, 1=enable (default)."); +MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD presses in arrow key mode. 0=disable, 1=enable (default)."); /* * In certain use cases, mouse mode isn't really helpful, and could actually @@ -455,14 +453,12 @@ MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " */ static bool nomouse; module_param(nomouse, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is " - "open. 0=don't disable, 1=disable. (default: don't disable)"); +MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is open. 0=don't disable, 1=disable. (default: don't disable)"); /* threshold at which a pad push registers as an arrow key in kbd mode */ static int pad_thresh; module_param(pad_thresh, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an " - "arrow key in kbd mode (default: 28)"); +MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an arrow key in kbd mode (default: 28)"); static void free_imon_context(struct imon_context *ictx) @@ -785,9 +781,7 @@ static ssize_t show_associate_remote(struct device *d, else strcpy(buf, "closed\n"); - dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for " - "instructions on how to associate your iMON 2.4G DT/LT " - "remote\n"); + dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for instructions on how to associate your iMON 2.4G DT/LT remote\n"); mutex_unlock(&ictx->lock); return strlen(buf); } @@ -1115,8 +1109,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; if (*rc_type && !(*rc_type & rc->allowed_protocols)) - dev_warn(dev, "Looks like you're trying to use an IR protocol " - "this device does not support\n"); + dev_warn(dev, "Looks like you're trying to use an IR protocol this device does not support\n"); if (*rc_type & RC_BIT_RC6_MCE) { dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); @@ -1129,8 +1122,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type) /* ir_proto_packet[0] = 0x00; // already the default */ *rc_type = RC_BIT_OTHER; } else { - dev_warn(dev, "Unsupported IR protocol specified, overriding " - "to iMON IR protocol\n"); + dev_warn(dev, "Unsupported IR protocol specified, overriding to iMON IR protocol\n"); if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); /* ir_proto_packet[0] = 0x00; // already the default */ @@ -1719,8 +1711,8 @@ static void imon_incoming_packet(struct imon_context *ictx, not_input_data: if (len != 8) { - dev_warn(dev, "imon %s: invalid incoming packet " - "size (len = %d, intf%d)\n", __func__, len, intf); + dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n", + __func__, len, intf); return; } @@ -1876,8 +1868,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx) allowed_protos = RC_BIT_RC6_MCE; break; default: - dev_info(ictx->dev, "Unknown 0xffdc device, " - "defaulting to VFD and iMON IR"); + dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD and iMON IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; /* We don't know which one it is, allow user to set the * RC6 one from userspace if OTHER wasn't correct. */ @@ -1934,8 +1925,8 @@ static void imon_set_display_type(struct imon_context *ictx) ictx->display_supported = false; else ictx->display_supported = true; - dev_info(ictx->dev, "%s: overriding display type to %d via " - "modparam\n", __func__, display_type); + dev_info(ictx->dev, "%s: overriding display type to %d via modparam\n", + __func__, display_type); } ictx->display_type = configured_display_type; @@ -2156,8 +2147,8 @@ static bool imon_find_endpoints(struct imon_context *ictx, if (!display_ep_found) { tx_control = true; display_ep_found = true; - dev_dbg(ictx->dev, "%s: device uses control endpoint, not " - "interface OUT endpoint\n", __func__); + dev_dbg(ictx->dev, "%s: device uses control endpoint, not interface OUT endpoint\n", + __func__); } /* @@ -2366,8 +2357,8 @@ static void imon_init_display(struct imon_context *ictx, /* set up sysfs entry for built-in clock */ ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group); if (ret) - dev_err(ictx->dev, "Could not create display sysfs " - "entries(%d)", ret); + dev_err(ictx->dev, "Could not create display sysfs entries(%d)", + ret); if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) ret = usb_register_dev(intf, &imon_lcd_class); @@ -2375,8 +2366,7 @@ static void imon_init_display(struct imon_context *ictx, ret = usb_register_dev(intf, &imon_vfd_class); if (ret) /* Not a fatal error, so ignore */ - dev_info(ictx->dev, "could not get a minor number for " - "display\n"); + dev_info(ictx->dev, "could not get a minor number for display\n"); } @@ -2456,8 +2446,8 @@ static int imon_probe(struct usb_interface *interface, mutex_unlock(&ictx->lock); } - dev_info(dev, "iMON device (%04x:%04x, intf%d) on " - "usb<%d:%d> initialized\n", vendor, product, ifnum, + dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n", + vendor, product, ifnum, usbdev->bus->busnum, usbdev->devnum); mutex_unlock(&driver_lock); diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index 0f301903aa6f..c5e8e3885766 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -55,14 +55,12 @@ MODULE_PARM_DESC(debug, "Enable debugging output"); /* low limit for RX carrier freq, Hz, 0 for no RX demodulation */ static int rx_low_carrier_freq; module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, " - "0 for no RX demodulation"); +MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation"); /* high limit for RX carrier freq, Hz, 0 for no RX demodulation */ static int rx_high_carrier_freq; module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, " - "Hz, 0 for no RX demodulation"); +MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation"); /* override tx carrier frequency */ static int tx_carrier_freq; @@ -1484,8 +1482,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) { model_no = model_number; - ite_pr(KERN_NOTICE, "The model has been fixed by a module " - "parameter."); + ite_pr(KERN_NOTICE, "The model has been fixed by a module parameter."); } ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model); diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 4f8c7effdcee..f813b77c595d 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -604,9 +604,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, break; case MCE_RSP_EQWAKEVERSION: if (!out) - dev_dbg(dev, "Wake version, proto: 0x%02x, " - "payload: 0x%02x, address: 0x%02x, " - "version: 0x%02x", + dev_dbg(dev, "Wake version, proto: 0x%02x, payload: 0x%02x, address: 0x%02x, version: 0x%02x", data1, data2, data3, data4); break; case MCE_RSP_GETPORTSTATUS: diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index d9c1f2ff7119..b241e5f569ef 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -660,8 +660,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol, dev->last_toggle = toggle; dev->last_keycode = keycode; - IR_dprintk(1, "%s: key down event, " - "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n", + IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n", dev->input_name, keycode, protocol, scancode); input_report_key(dev->input_dev, keycode, 1); diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 05ba47bc0b61..3b0ed1c3f2d8 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -265,8 +265,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) /* Codes 0x20 through 0x2f are IR Firmware Errors */ case 0x20: - pr_cont("Initial signal pulse not long enough " - "to measure carrier frequency\n"); + pr_cont("Initial signal pulse not long enough to measure carrier frequency\n"); break; case 0x21: pr_cont("Not enough length values allocated for signal\n"); @@ -278,18 +277,15 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) pr_cont("Too many signal repeats\n"); break; case 0x28: - pr_cont("Insufficient memory available for IR signal " - "data memory allocation\n"); + pr_cont("Insufficient memory available for IR signal data memory allocation\n"); break; case 0x29: - pr_cont("Insufficient memory available " - "for IrDa signal data memory allocation\n"); + pr_cont("Insufficient memory available for IrDa signal data memory allocation\n"); break; /* Codes 0x30 through 0x3f are USB Firmware Errors */ case 0x30: - pr_cont("Insufficient memory available for bulk " - "transfer structure\n"); + pr_cont("Insufficient memory available for bulk transfer structure\n"); break; /* @@ -301,8 +297,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) pr_cont("Signal capture has been terminated\n"); break; case 0x41: - pr_cont("Attempt to set/get and unknown signal I/O " - "algorithm parameter\n"); + pr_cont("Attempt to set/get and unknown signal I/O algorithm parameter\n"); break; case 0x42: pr_cont("Signal capture already started\n"); @@ -917,8 +912,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3) goto out; } - snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s " - "Infrared Remote Transceiver (%04x:%04x)", + snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s Infrared Remote Transceiver (%04x:%04x)", prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "", le16_to_cpu(rr3->udev->descriptor.idVendor), prod); diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index 4004260a7c69..53f9b0af358a 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -297,8 +297,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) goto out; } - snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " - "Receiver (%04x:%04x)", + snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared Receiver (%04x:%04x)", le16_to_cpu(sz->usbdev->descriptor.idVendor), le16_to_cpu(sz->usbdev->descriptor.idProduct)); usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); @@ -364,15 +363,15 @@ static int streamzap_probe(struct usb_interface *intf, sz->endpoint = &(iface_host->endpoint[0].desc); if (!usb_endpoint_dir_in(sz->endpoint)) { - dev_err(&intf->dev, "%s: endpoint doesn't match input device " - "02%02x\n", __func__, sz->endpoint->bEndpointAddress); + dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n", + __func__, sz->endpoint->bEndpointAddress); retval = -ENODEV; goto free_sz; } if (!usb_endpoint_xfer_int(sz->endpoint)) { - dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " - "02%02x\n", __func__, sz->endpoint->bmAttributes); + dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n", + __func__, sz->endpoint->bmAttributes); retval = -ENODEV; goto free_sz; } diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 95ae60e659a1..cdcd6e38b295 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -227,8 +227,7 @@ struct wbcir_data { static enum wbcir_protocol protocol = IR_PROTOCOL_RC6; module_param(protocol, uint, 0444); -MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command " - "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); +MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command (0 = RC5, 1 = NEC, 2 = RC6A, default)"); static bool invert; /* default = 0 */ module_param(invert, bool, 0444); @@ -244,8 +243,7 @@ MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command"); static unsigned int wake_rc6mode = 6; module_param(wake_rc6mode, uint, 0644); -MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command " - "(0 = 0, 6 = 6A, default)"); +MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command (0 = 0, 6 = 6A, default)"); @@ -1050,8 +1048,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) goto exit_free_data; } - dev_dbg(&device->dev, "Found device " - "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", + dev_dbg(&device->dev, "Found device (w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", data->wbase, data->ebase, data->sbase, data->irq); data->led.name = "cir::activity";