From: Sergei Shtylyov Date: Thu, 24 Apr 2014 22:44:12 +0000 (+0400) Subject: ARM: shmobile: henninger: add Ether DT support X-Git-Tag: next-20140428~78^2~1^2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=26b0d2cf73cb;p=karo-tx-linux.git ARM: shmobile: henninger: add Ether DT support Define the Henninger board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 0053f52bc969..f82f306c074d 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "console=ttySC0,38400 ignore_loglevel"; + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; memory@40000000 { @@ -40,6 +40,16 @@ renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; }; &scif0 { @@ -48,3 +58,19 @@ status = "okay"; }; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +};