From: Ivan Vecera Date: Thu, 26 Feb 2015 13:48:07 +0000 (+0100) Subject: bnx2: disable toggling of rxvlan if necessary X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=26caa3469a2de617d95c29371571a9585603a023;p=linux-beck.git bnx2: disable toggling of rxvlan if necessary The bnx2 driver uses .ndo_fix_features to force enable of Rx VLAN tag stripping when the card cannot disable it. The driver should remove NETIF_F_HW_VLAN_CTAG_RX flag from hw_features instead so it is fixed for the ethtool. Cc: Sony Chacko Cc: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 9f146b990c01..2b66ef3d8217 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -7708,17 +7708,6 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state) return 0; } -static netdev_features_t -bnx2_fix_features(struct net_device *dev, netdev_features_t features) -{ - struct bnx2 *bp = netdev_priv(dev); - - if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)) - features |= NETIF_F_HW_VLAN_CTAG_RX; - - return features; -} - static int bnx2_set_features(struct net_device *dev, netdev_features_t features) { @@ -8525,7 +8514,6 @@ static const struct net_device_ops bnx2_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = bnx2_change_mac_addr, .ndo_change_mtu = bnx2_change_mtu, - .ndo_fix_features = bnx2_fix_features, .ndo_set_features = bnx2_set_features, .ndo_tx_timeout = bnx2_tx_timeout, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -8576,6 +8564,9 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->features |= dev->hw_features; dev->priv_flags |= IFF_UNICAST_FLT; + if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)) + dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX; + if ((rc = register_netdev(dev))) { dev_err(&pdev->dev, "Cannot register net device\n"); goto error;