From: Andrew Victor <linux@maxim.org.za>
Date: Wed, 23 Jan 2008 08:29:46 +0000 (+0100)
Subject: [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2743f0c1dcca54d6c80b0de1273b3f4e90051a85;p=linux-beck.git

[ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200

Due to errata regarding the handling of SPI CS0 on the AT91RM9200, the
atmel_spi driver drives CS0 from the SPI controller and not as a GPIO
pin.
We therefore need to configure CS0 for use by the controller

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ea9a952fb877..ef6aeb86e980 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -558,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi_standard_cs[devices[i].chip_select];
 
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
+		if (devices[i].chip_select == 0)	/* for CS0 errata */
+			at91_set_A_periph(cs_pin, 0);
+		else
+			at91_set_gpio_output(cs_pin, 1);
+
 
 		/* pass chip-select pin to driver */
 		devices[i].controller_data = (void *) cs_pin;