From: H Hartley Sweeten Date: Tue, 3 May 2016 19:29:40 +0000 (-0700) Subject: staging: comedi: das16m1: tidy up comments in das16m1_handler() X-Git-Tag: v4.8-rc1~193^2~214 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=27eeef415d2b0a3f07bfc5c5c2446a35ab87e5f7;p=karo-tx-linux.git staging: comedi: das16m1: tidy up comments in das16m1_handler() Fix the checkpatch.pl issue: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c index 90d3869553c9..75e096a7c12d 100644 --- a/drivers/staging/comedi/drivers/das16m1.c +++ b/drivers/staging/comedi/drivers/das16m1.c @@ -405,20 +405,24 @@ static void das16m1_handler(struct comedi_device *dev, unsigned int status) /* figure out how many samples are in fifo */ hw_counter = comedi_8254_read(devpriv->counter, 1); - /* make sure hardware counter reading is not bogus due to initial value - * not having been loaded yet */ + /* + * Make sure hardware counter reading is not bogus due to initial + * value not having been loaded yet. + */ if (devpriv->adc_count == 0 && hw_counter == devpriv->initial_hw_count) { num_samples = 0; } else { - /* The calculation of num_samples looks odd, but it uses the + /* + * The calculation of num_samples looks odd, but it uses the * following facts. 16 bit hardware counter is initialized with * value of zero (which really means 0x1000). The counter * decrements by one on each conversion (when the counter * decrements from zero it goes to 0xffff). num_samples is a * 16 bit variable, so it will roll over in a similar fashion * to the hardware counter. Work it out, and this is what you - * get. */ + * get. + */ num_samples = -hw_counter - devpriv->adc_count; } /* check if we only need some of the points */ @@ -441,8 +445,10 @@ static void das16m1_handler(struct comedi_device *dev, unsigned int status) } } - /* this probably won't catch overruns since the card doesn't generate - * overrun interrupts, but we might as well try */ + /* + * This probably won't catch overruns since the card doesn't generate + * overrun interrupts, but we might as well try. + */ if (status & OVRUN) { async->events |= COMEDI_CB_ERROR; dev_err(dev->class_dev, "fifo overflow\n");